Latest Documents


  • 2-September-2014

    English

    Water Treatment Chemicals

    This OECD Emission Scenario Document (ESD)  provides information on the
    sources, use patterns and release pathways of chemicals used in the treatment of water in a number of areas to assist in the estimation of releases of chemicals to the environment.
     

  • 2-September-2014

    English

    Formulation of Radiation Curable Coatings, Inks and Adhesives

    This OECD Emission Scenario Document (ESD) provides information on the sources, use patterns, and potential release pathways of chemicals used in the radiation curable products industry, specifically during formulation of radiation curable coatings, inks, and adhesives. The document focuses primarily on ultraviolet (UV) and electron beam (EB) curable products and presents standard approaches for estimating the environmental

  • 2-September-2014

    English

    Blending of Fragrance Oils into Commercial and Consumer Products

    The scope of this Emissions Scenario Document includes the blending of fine and functional fragrance oils into consumer and commercial products. The manufacture of aroma chemicals and the formulation of fragrance oil are outside the scope of this scenario. However, these industrial operations are discussed in this section as an introduction to the fragrance industry as a whole. The following life-cycle diagram demonstrates the

  • 2-September-2014

    English

    Guidance Document on the Validation of (Quantitative) Structure-Activity Relationship [(Q)SAR] Models

    To keep (Q)SAR applications on a solid scientific foundation, an international effort to articulate principles for (Q)SAR technology and to develop a guidance document for use of (Q)SAR in regulatory applications. This document presents those principles and helpful guides for validating (Q)SAR technology for a variety of applications.

  • 2-September-2014

    English

    Plastic Additives

    This OECD Emission Scenario Document (ESD) provides information on the sources, use patterns and release pathways of chemicals used as additives in plastics to assist in the estimation of releases of chemicals to the environment.

  • 2-September-2014

    English

    Lubricants and Lubricant Additives

    This OECD Emission Scenario Document (ESD) provides information on the sources, use patterns and release pathways of chemicals used in lubricants to assist in the estimation of releases of chemicals into the environment.
     

  • 2-September-2014

    English

    Textile Finishing

    This OECD Emission Scenario Document (ESD) is intended to provide information on the sources, use patterns and release pathways of chemicals used in textile finishing industry to assist in the estimation of releases of chemicals to the environment.
     

  • 2-September-2014

    English

    OECD Guidance to the Environmental Safety Evaluation of Microbial Biocontrol Agents

    This document dealing with biological pesticides provides guidance to both industry and regulatory authorities, in the context of applications for the approval of microbial biological control agents (mBCAs), and for the registration of microbial biological control products (mBCPs).

  • 2-September-2014

    English

    Adhesive Formulation

    This OECD Emission Scenario Document (ESD)  provides information on the sources, use patterns, and potential release pathways of chemicals used in the adhesive formulation industry. The document presents standard approaches for estimating the environmental releases of and occupational exposures to additives and components used in adhesive formulations. These approaches are intended to provide conservative, screening-level

  • 2-September-2014

    English

    Pulp, Paper and Board Industry

    This OECD Emission Scenario Document (ESD) is intended to provide information on the sources, use patterns and release pathways of chemicals used in the pulp, paper and board industry, in order to help estimate releases of chemicals into the environment. This ESD covers the use of chemicals in the making of paper and board and the recycling of paper and board. The main processes considered are paper-making and paper recycling

  • << < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | 111 | 112 | 113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | 121 | 122 | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | 131 | 132 | 133 | 134 | 135 | 136 | 137 | 138 | 139 | 140 | 141 | 142 | 143 | 144 | 145 | 146 | 147 | 148 | 149 | 150 | 151 | 152 | 153 | 154 | 155 | 156 | 157 | 158 | 159 | 160 | 161 | 162 | 163 | 164 | 165 | 166 | 167 | 168 | 169 | 170 | 171 | 172 | 173 | 174 | 175 | 176 | 177 | 178 | 179 | 180 | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 > >>