Latest Documents


  • 13-April-2011

    English

    Emission Scenario Document on Textile Finishing Industry

    This OECD Emission Scenario Document (ESD) is intended to provide information on the sources, use patterns and release pathways of chemicals used in textile finishing industry to assist in the estimation of releases of chemicals to the environment.

    Related Documents
  • 13-April-2011

    English

    Emission Scenario Document for Wood Preservatives [PART 3]

    This Emission Scenario Document (ESD) presents an approach to estimate the emissions of wood preservatives from two stages of their life cycle: 1) application and storage of treated wood prior to shipment, and 2) treated wood-in service. This ESD can be used in the estimation of concentrations in the environment of specific active substances used in wood preservatives.

    Related Documents
  • 13-April-2011

    English

    Emission Scenario Document on Plastic Additives

    This OECD Emission Scenario Document (ESD) is intended to provide information on the sources, use patterns and release pathways of chemicals used as additives in plastics to assist in the estimation of releases of chemicals to the environment.

    Related Documents
  • 13-April-2011

    English

    Emission Scenario Document on Additives in Rubber Industry

    This OECD Emission Scenario Document (ESD) is intended to provide information on the sources, use patterns and release pathways of chemicals used as additives in rubber industry to assist in the estimation of releases of chemicals to the environment.

    Related Documents
  • 13-April-2011

    English

    Draft Emission Scenario Document on Textile Manufacturing Wool Mills

    This document includes a draft emission scenario document (ESD) on textilemanufacturing wool mills, submitted by Canada. This document is intended to provide additional information about the published ESD on Textile Finishing Industry [ENV/JM/MONO(2004)12].

    Related Documents
  • 13-April-2011

    English

    Draft Emission Scenario Document on Textile Manufacturing Woven Mills

    This document includes a draft emission scenario document (ESD) on textilemanufacturing wool mills, submitted by Canada. This document is intended to provide dditional information about the published ESD on Textile Finishing Industry[ENV/JM/MONO(2004)12].

    Related Documents
  • 13-April-2011

    English

    Guidance Document on the Use of Multimedia Models in the Assessment of Overall Persistance (POV) and long-range transport

    This Guidance Document is addressed to those who are involved in risk assessment and management of chemicals called POPs (persistent organic pollutants) or PBTs (persistent and bio-accumulating toxics).It is about using multimedia models, i.e. generic evaluative models that can calculate overall environmental persistence (Pov) and potential for long-range transport (LTRP) covering multiple compartments such as air, water, sediment and

    Related Documents
  • 13-April-2011

    English

    Emission Scenario Documents on Lubricants and Lubricant Additatives

    This OECD Emission Scenario Document (ESD) is intended to provide information on the sources, use patterns and release pathways of chemicals used in lubricants to assist in the estimation of releases of chemicals into the environment.

    Related Documents
  • 13-April-2011

    English

    Emission Scenario Document for Insecticides for Stables and Manure Storage Systems

    This ESD should be seen as a ‘living’ document, which provides the most updated information available. As such, an ESD can be updated to take account of changes and new information that becomes available.

    Related Documents
  • 13-April-2011

    English

    Comparison of Emission Estimation Methods Used in Pollutant Release and Transfer Registers (PRTRs) and Emission Scenario Documents (ESDs): Case Study of Pulp and Paper and Textile Sectors

    Emission estimation plays a key role in the risk assessments of chemical pollutants. Emission estimation methods are used to calculate emissions by both regulatory agencies and emitting facilities in OECD member countries. The purpose of regulatory agencies is to evaluate the risk of chemical pollutants to human health and the environment based on emission estimates: the evaluation is commonly facilitated with the use of Emission

    Related Documents
  • << < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 > >>