ADMINISTRATIVE DATA

REMARKS:

Under this main heading, fields are subsumed for identifying the purpose of the record (e.g., 'key study'), the type of result (e.g., 'experimental study'), data waiving indication (if any), reliability indication, and flags for indicating the regulatory purpose envisaged and/or any confidentiality restrictions. This kind of data characterise the relevance of a study summary and may therefore be displayed on top of each template. For detailed guidance, refer to Administrative data.

SE09.06.00.0215

DATA SOURCE

[Data source]

Main heading under which generic 'Data source' fields are subsumed.

SE09.06.00.0219

[Reference]

Indicate the bibliographic reference of the study report or publication the study summary is based on. Always enter the primary reference in the first block of fields (i.e. Sort no. = 1), if there are more than one reference to be cited. Copy this block of fields for specifying any other references related to this record (e.g. report of a preliminary study or other documentation). If results of a study report have been published, indicate the full citation of that publication(s) in addition to the reference of the original study.

Heading of field block 'Reference'

SE09.06.00.0220

Reference type

[Reference type]

Picklist Values:

study report || other company data || publication || review article or handbook || secondary source || grey literature || other:

Indicate the type of reference, e.g. 'Study report' or 'Publication'. Select 'Other company data' to characterise any unpublished information from a company other than a study report. Select 'Grey literature' for any other unpublished information or 'other:' and specify.

Indicator specifying the type of reference, e.g. 'Study report' or 'Publication'.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:PHRASEOTHER_REFERENCE_TYPE>

<i5:REFERENCE_TYPE>

SE09.06.00.0221

Reference type

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:PHRASEOTHER_REFERENCE_TYPE>

<i5:REFERENCE_TYPE_TXT>

SE09.06.00.0230

Author(s) (or transferred reference)

[Author]

For ease of sorting and searchability use following convention: Surname, Initial (Example 1: White D, Ruehl KJ, Borman SA & Little J. Example 2: Hartley M & Murray W (avoid unnecessary full-stops, commas)). If no individuals are cited as authors, enter name of company or organisation or 'Anon.' as appropriate.

Note that the complete bibliographic reference may appear in this field after migration of unstructured data from existing databases.

Name(s) of author(s) of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_AUTHOR>

<i5:REFERENCE_AUTHOR>

SE09.06.00.0240

Year

[Year]

Enter year of study report or publication. For a study report this field should be completed to include it in any searches, regardless of whether the complete date is given in field 'Report date'.

Year of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_YEAR>

<i5:REFERENCE_YEAR>

SE09.06.00.0250

Title

[Title]

Include the title of the report. For publications, include the title of the article of a journal or article/chapter of a book (e.g. handbook).

Title of a study report or title of published article of journal or book (e.g. handbook).

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_TITLE>

<i5:REFERENCE_TITLE>

SE09.06.00.0260

Bibliographic source

[Bibliographic source]

Not relevant for any study report. For publications or any other literature source (grey literature) specify the following type of information: (i) Title of scientific journal or book (e.g. if handbook); (ii) Volume of journal; (iii) Editor, publisher, place of publication for books or articles in books; (iv) Pagination.

Example 1 (journal): J. Agric. Food Chem. 38: 215-227

Example 2 (handbook): In: Lyman WJ (ed.) Handbook of chemical property estimation methods. Environmental behavior of organic compounds. McGraw-Hill Book Company 15.1-15.34, New York.

Bibliographic source of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_SOURCE>

<i5:REFERENCE_SOURCE>

SE09.06.00.0270

Testing laboratory

[Testing laboratory]

Either manually enter the name of the testing laboratory or select it from the picklist. In either case, editing is possible.

Name of the testing laboratory.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_TESTLAB>

<i5:REFERENCE_TESTLAB>

SE09.06.00.0280

Report no.

[Report no.]

Specify the report number allocated by the testing laboratory. Note that any company-specific study number should be included in the respective field.

Report number allocated by the testing laboratory.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_REPORT_NO>

<i5:REFERENCE_REPORT_NO>

SE09.06.00.0290

Owner company

[Owner company]

Either manually enter the identity of the company who owns the data or select it from the picklist. In either case, editing is possible.

Identity of the sponsor company who owns the study report.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_COMPANY_ID>

<i5:REFERENCE_COMPANY_ID>

SE09.06.00.0300

Company study no.

[Company study no.]

Specify any company study no. if there is such a number and if it is different from the report no. of the testing laboratory. Otherwise leave field empty.

Company-specific study number.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_COMPANY_STUDY_NO>

<i5:REFERENCE_COMPANY_STUDY_NO>

SE09.06.00.0310

Report date

[Report date]

Specify the complete date of the study report, e.g. '2005-05-12' for 12 May 2005. Note that subfield 'Year' should be completed in any case for sorting and searching purposes.

Complete date of the study report.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_REPORT_DATE>

<i5:REFERENCE_REPORT_DATE>

SE09.06.00.0320

Data access

[Data access]

Picklist Values:

data submitter is data owner || data submitter has Letter of Access || data no longer protected || data published || not applicable || other:

Select appropriate indication for data access. Enter 'Not applicable' if the summary consists of information that is commonly accessible such as guidance on safe use.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:DATA_ACCESS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE09.06.00.0321

Data access

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:DATA_ACCESS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE09.06.00.0330

Data protection claimed

[Data protection claimed]

Picklist Values:

yes || yes, but willing to share || yes, but not willing to share

Indicate as appropriate. Note: 'yes' should be selected only if 'Data submitter is data owner' or 'Data submitter has Letter of Access'. Options 'yes, but willing to share' or 'yes, but not willing to share' may be relevant for specific regulatory programmes where the submitter is requested to indicate whether he is willing to share studies (e.g. with vertebrates).

In the supplementary remarks field, include an explanation as appropriate, i.e. justification for denial of sharing the corresponding study or refer to a document attached that provides justification (e.g. 'for justification see attached document X')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:DATA_PROT_CLAIM>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX>

SE09.06.00.0331

Data protection claimed

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:DATA_PROT_CLAIM>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX_TXT>

SE09.06.00.0340

Cross-reference to same study

[Cross-reference to same study]

A cross-reference can be included to indicate that the same study is recorded in another record. Indicate the respective chapter and record ID and enter relevant explanatory text. This may be useful if specific endpoints of a given study are described in another chapter (e.g. results on reproduction toxicity in case of a combined repeated dose / reproduction toxicity study) or if more than one experiment is described by the same study report, but included in separate records.

Check with the relevant guidance document whether all the methodology details must be repeated or whether a cross-reference to the same study in another chapter may suffice.

Note that any such cross-reference may become useless if a record is either printed or exchanged on its own.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:CROSSREF_SAMESTUDY>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0345

MATERIALS AND METHODS

[Materials and methods]

Main heading under which generic 'Materials and methods' fields are subsumed.

SE09.06.00.0350

Study type

[Study type]

Picklist Values:

Leaching || other:

Indicate the appropriate study type.

Indicator specifying study type

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:STUDY_TYPE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE09.06.00.0351

Study type

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:STUDY_TYPE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE09.06.00.0360

Company Study No.

[Company Study No.]

Specify any company study number if there is such a number and if it is different from the report number of the testing laboratory.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:COMPANY_STUDY_NO>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0370

Report date

[Report date]

Specify the date of the study report.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REPORT_DATE>

<i5:set>

<i5:TEXT_SHORT_BELOW>

<i5:TEXT_SHORT_BELOW>

SE09.06.00.0380

Test water

[Test water]

Picklist Values:

freshwater || seawater

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_WATER>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE09.06.00.0389

Test guideline

[Test guideline]

Indicate according to which test guideline the study was conducted. If no test guideline was explicitly followed, but the methodology used is equivalent or similar to a specific guideline, you can indicate so in the 'Qualifier' subfield preceding the field 'Guideline'.

Copy this block of fields for specifying more than one guideline (e.g. US EPA in addition to OECD guideline).

Heading of field block 'Guideline'

SE09.06.00.0390

Qualifier

[Qualifier]

Picklist Values:

according to || equivalent or similar to || no guideline followed || no guideline available || no guideline required

Select appropriate qualifier, i.e.

- 'according to' (if a given test guideline was followed);

- 'equivalent or similar to' (if no test guideline was explicitly followed, but the methodology is equivalent or similar to a specific guideline);

- 'no guideline followed' (if none of above qualifiers apply. If so, fill in field 'Principles of method if other than guideline');

- 'no guideline available/required' (if applicable; fill in field 'Principles of method if other than guideline').

An indicator signifying how strict the guideline given in the subsequent field 'Guideline' was followed or whether no guideline was used or available/required.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:GUIDELINE>

<i5:set>

<i5:QUALIFIER>

<i5:QUALIFIER>

SE09.06.00.0400

Guideline

[Guideline]

Picklist Values:

OECD Guideline 313 (Estimation of Emissions from Preservative - Treated Wood to the Environment: Laboratory Method for wooden commodities that are not Covered and are in contact with Fresh Water or Seawater) || other guideline:

Select the applicable test guideline, e.g. 'OECD Guideline xxx'. If the test guideline used is not listed, choose 'other guideline:' and specify the test guideline in the related text field.

In this text field, you can also enter any remarks as applicable, particularly:

- To include any other title of the test guideline draft used, a subtitle, another version or update number and the year of update (For instance, different titles and/or numbers may exist for a given EU test guideline.);

- To indicate if a the study was performed prior to the adoption of the test guideline specified;

- To indicate if the methodology used was based on an extension of the test guideline specified.

An indicator signifying how strict the guideline given in the subsequent field 'Guideline' was followed or whether no guideline was used or available/required.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_GUIDELINE>

<i5:GUIDELINE>

SE09.06.00.0401

Guideline

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_GUIDELINE>

<i5:GUIDELINE_TXT>

SE09.06.00.0420

Deviations from guideline

[Deviations]

Picklist Values:

yes || no || no data || not applicable

For robust study summaries or as requested by the regulatory programme, indicate if there are any deviations from the test guideline specified. If 'yes' is selected, only briefly state relevant deviations in the supplementary remarks field (e.g. 'other species used'); details should be described in the respective fields of the section MATERIALS AND METHODS.

Indication that a study contains deviations from the standard test protocol.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_DEVIATION>

<i5:DEVIATION>

SE09.06.00.0421

Deviations from guideline

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_DEVIATION>

<i5:DEVIATION_TXT>

SE09.06.00.0430

Principles of method if other than guideline

[Principles of method if other than guideline]

If no guideline was followed, include a description of the principles of the test protocol or estimated method used in the study. Details should be entered in appropriate distinct fields of section MATERIALS AND METHODS if available. Also provide a justification for using this method if appropriate.

If an estimation method was used (to be indicated in field 'Test result type') state the equation(s) and/or computer software or other methods applied to calculate the value(s).

Description of the test protocol or estimated method used in the study, if other than a guideline, and justification for using this method if appropriate.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:METHOD_NOGUIDELINE>

<i5:set>

<i5:TEXTAREA_BELOW>

<i5:TEXTAREA_BELOW>

SE09.06.00.0440

GLP compliance

[GLP compliance]

Picklist Values:

yes (incl. certificate) || yes || no || no data

Indicate whether the study was conducted following Good Laboratory Practice or not. Select 'yes (incl. certificate)' if a GLP certificate of a test facility is available. Select 'yes' if a GLP compliance statement is available, but no information on a GLP certificate. You can give an explanation in the supplementary remarks field, e.g. for explaining why GLP was not complied with or for specifying which (national) GLP was followed.

Indication whether a GLP certificate or compliance statement is available.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:GLP_COMPLIANCE_STATEMENT>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX>

SE09.06.00.0441

GLP compliance

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:GLP_COMPLIANCE_STATEMENT>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX_TXT>

SE09.06.00.0445

Test materials

[Test materials]

Subheading of section 'Test materials'

SE09.06.00.0450

Identity of test material same as for substance defined in section 1 (if not read across)

[Identity of test material same as for substance defined in section 1 (if not read across)]

Picklist Values:

yes || no

Indicate if the test material used in the study is equivalent to the submission substance identity. If 'yes' is selected, the corresponding identity is automatically entered in the subsequent block of fields 'Test material identity'.

If 'no' is selected, identify the test material in the subsequent block of fields 'Test material identity'. In this case, also make sure that the information entered in field 'Study result type' is consistent, i.e. 'read-across from supporting substance (structural analogue or surrogate)'.

NOTE: If a completed record is used for another submission, you may have to update both fields 'Study result type' and 'Test material equivalent to submission substance identity'.

Indicator showing whether the test material used is equivalent to the submission substance identity.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TESTMAT_INDICATOR>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE09.06.00.0459

Test material identity

[Test material identity]

If the identity of the test material used for this study is not included in this block of fields automatically, indicate the identity for one or more appropriate identifiers, e.g. CAS number, CAS name, IUPAC name. Copy this block of fields as appropriate.

If another than the submission substance identity was selected erroneously, go back to field 'Test material equivalent to submission substance identity' and select 'yes'. This will prompt automatic entry of the respective identifiers.

Heading of field block 'Test material identity'

SE09.06.00.0460

Identifier

[Identifier]

Picklist Values:

CAS name || CAS number || Common name || EC name || EC number || IUPAC name || TSCA name || other:

Select an appropriate identifier from drop-down list, e.g. 'CAS number'. Use 'Other:' and specify, if identity according to a standard identifier is not known or if an additional chemical name or number is provided.

Indicator specifying the type of chemical identifier, e.g. CAS name.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TESTMAT>

<i5:set>

<i5:PHRASEOTHER_IDENTIFIER>

<i5:IDENTIFIER>

SE09.06.00.0461

Identifier

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TESTMAT>

<i5:set>

<i5:PHRASEOTHER_IDENTIFIER>

<i5:IDENTIFIER_TXT>

SE09.06.00.0470

Identity

[Identity]

Select the corresponding substance identity from drop-down list or enter manually if the identity is not available from the list or if no list is provided for the type of identifier selected.

Identity of the chemical substance used in the study or referred to in the record.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TESTMAT>

<i5:set>

<i5:ID>

<i5:ID>

SE09.06.00.0475

Physical form

[Test material form]

Picklist Values:

aerosol || compact || crystalline || dispersion || fibre || filaments || flakes || liquified gas || nanomaterial || particulates || paste || pellets || powder || refrigerated liquid || suspension || viscous || other: || no data

Form of the substance, i.e. powder, crystalline, compact, viscous, etc.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TESTMAT_FORM>

<i5:set>

<i5:PHRASEOTHER_TESTMAT_FORM>

<i5:TESTMAT_FORM>

SE09.06.00.0476

Test material form

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TESTMAT_FORM>

<i5:set>

<i5:PHRASEOTHER_TESTMAT_FORM>

<i5:TESTMAT_FORM_TXT>

SE09.06.00.0480

Details on test material

[Details on test material]

Freetext Templates:

- Name of test material (as cited in study report):

- Molecular formula (if other than submission substance):

- Molecular weight (if other than submission substance):

- Smiles notation (if other than submission substance):

- InChl (if other than submission substance):

- Structural formula attached as image file (if other than submission substance): see Fig.

- Substance type:

- Physical state:

- Analytical purity:

- Impurities (identity and concentrations):

- Composition of test material, percentage of components:

- Isomers composition:

- Purity test date:

- Lot/batch No.:

- Expiration date of the lot/batch:

- Radiochemical purity (if radiolabelling):

- Specific activity (if radiolabelling):

- Locations of the label (if radiolabelling):

- Expiration date of radiochemical substance (if radiolabelling):

- Stability under test conditions:

- Storage condition of test material:

- Other:

Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

Note that any information that can be claimed confidential should be included in the subsequent field 'Confidential details on test material'.

Explanations:

- Name of test material (as cited in study report): only if different from any other identifiers provided in the preceding fields.

- Molecular formula (if other than submission substance): specify

- Molecular weight (if other than submission substance): specify

- Smiles notation (if other than submission substance): provide if available

- InChl (if other than submission substance): provide if available

- Structural formula attached as image file (if other than submission substance): see Fig.: only if different from submission substance. Indicate Fig. no. if a file is attached in field 'Attached document', e.g. state 'see Fig. 1'.

- Substance type: indicate whether pure active substance, technical product, formulation or other.

- Physical state: indicate 'gas', 'solid' or 'liquid' only if different from submission substance or if substance can occur in different physical states.

- Analytical purity: specify in %

- Impurities (identity and concentrations): specify

- Composition of the test material, percentage of components: specify if applicable

- Isomers composition: specify if applicable

- Purity test date: provide if available

- Lot/batch No.: provide if available

- Expiration date of the lot/batch: provide if available

- Radiochemical purity (if radiolabelling): specify if applicable

- Specific activity (if radiolabelling): specify if applicable

- Locations of the label (if radiolabelling): specify if applicable

- Expiration date of radiochemical substance (if radiolabelling): specify if applicable

- Storage condition of test substance: specify if applicable

- Stability under test conditions: indicate if available

Details on description and specification of the actual test material.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TESTMAT_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE09.06.00.0490

Confidential details on test material

[Confidential details on test material]

Freetext Templates:

- Analytical purity:

- Impurities (identity and concentrations):

- Composition of test material, percentage of components:

- Purity test date:

- Lot/batch No.:

- Expiration date of the lot/batch:

- Isomers composition:

- Other:

Enter any confidential information on the test material in this separate field. Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

Explanations:

- Analytical purity: specify in %

- Impurities (identity and concentrations): specify

- Composition of the test material, percentage of components: specify if applicable

- Purity test date: provide if available

- Lot/batch No.: provide if available

- Expiration date of the lot/batch: provide if available

- Isomers composition: specify if applicable

Confidential details on the actual test material.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TESTMAT_CONFIDENTIAL_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE09.06.00.0525

Wood Preservative

[Wood Preservative]

SE09.06.00.0530

Supplier of the preservative (name)

[Supplier of the preservative (name)]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:SUPPLIER_PRESERV>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0540

Type of formulation

[Type of formulation]

Picklist Values:

liquid formulation || emulsion/micro-emulsion || solid formulation || granulate material || rod/cartridge || pastes || bandages || foams || gas generating product || other:

Indicate the type of formulation for the product.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TYPE_FORMULATION>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE09.06.00.0541

Type of formulation

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TYPE_FORMULATION>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE09.06.00.0550

Preservative (specific and unique name or code)

[Preservative (specific and unique name or code)]

Picklist Values:

Oil Borne: Creosote || Oil Borne: Creosote solutions || Oil Borne: Creosote - petroleum || Oil Borne: Pentachlorophenol (PCP) Type A || Oil Borne: Pentachlorphenol (PCP) Type E || Oil Borne: Copper Napthenate || Oil Borne: Oxine Copper (copper-8-quinolinolate) || Oil Borne: Propiconazole || Oil Borne: Tebuconazole || Oil Borne: Chloropyiphos || Waterborne: Acid Copper chromate (ACC) or didecyldimethylammonium-chloride (DDAC) || Waterborne: didecyldimethylammonium carbonate/bicarbonate (Carboquat) || Waterborne: Alkaline Copper Quat Type B (ACQ-B) || Waterborne: Alkaline Copper Quat Type D (ACQ-D) || Waterborne: Alkyl Ammonia Compound (ACC) and Inorganic Boron || Waterborne: Ammoniacal Copper Citrate (CC) || Waterborne: Ammoniacle Copper Zinc Arsenate (ACZA) or Ammoniacal Copper Zinc || Waterborne: Arsenate (ACA) || Waterborne: Borate Preservatives || Waterborne: Copper Azol-Type A (CBA-A) || Waterborne: Copper Azole Type B (CA-B) (Wolman E) || Waterborne: Copper Bis(Dimethyldithiocarbamate) (CDDC) || Waterborne: Chromated Copper Arsenate Type A (CCA-A) (Greensalt) || Waterborne: Chromated copper Arsenate Type B (CCA-B)(K-33) || Waterborne: Chromated Copper Arsenate Type C (CCA-C) (Wolman) || Waterborne: 4,5, Dichloro-n-octyl-4-isothiazolin-3-one (RH-287) (Kathon) || other:

Indicate the type of wood preservative used, and select 'other' to characterize any unlisted preservative.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:PRESERVATIVE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE09.06.00.0551

Preservative (specific and unique name or code)

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:PRESERVATIVE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE09.06.00.0560

Active Ingredient(s) (trade or common name)

[Active Ingredient(s) (trade or common name)]

Picklist Values:

arsenic || arsenic acid || arsenic pentaoxide || boric acid || chromium || chromium trioxide || citric acid || copper carbonate || copper hydroxide || copper oxide || copper sulfate || creosote || pyroarsenate || sodium arsenate || sodium borate || sodium pentaborate || sodium cotoborate || sodium tetraborate || zinc || zinc oxide || 4,5, Dichloro-n-octyl-4-isothiazolin-3-one || other:

Indicate the type of wood preservative used, and select 'other' to characterize any unlisted preservative. Also, indicate one or more of the appropriate identifiers (e.g. CAS number, CAS name, IUPAC name, EC name, EC, number, TSCA name).

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:ACTIVE_INGREDIENTS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE09.06.00.0561

Active Ingredient(s) (trade or common name)

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:ACTIVE_INGREDIENTS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE09.06.00.0580

Composition (in % m/m)

[Composition (in % m/m)]

When multiple active constituents are present in the timber treatment formulation, the % m/m composition of each of the active constituents is to be given along with the chemical form in which the active constituent is measured (e.g.; if cuprous oxide is used, the % of copper and oxide should be expressed individually).

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:COMPOSITION>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0585

Coformulants

[Coformulants]

Give a generic description of the coformulants (e.g. co-solvent, resine, etc.)

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:COFORMULANTS>

<i5:set>

<i5:TEXTAREA_BELOW>

<i5:TEXTAREA_BELOW>

SE09.06.00.0590

Retention or loading specified for tested wood

[Retention or loading specified for tested wood]

Picklist Values:

label retention rates || actual test retention rate

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE09.06.00.0595

Application

[Application]

SE09.06.00.0600

Application method

[Application method]

Picklist Values:

penetration process || vacuum pressure//penetration process || double vacuum pressure//superficial treatment || dipping//superficial treatment || spraying//superficial treatment || brushing//industrial treatment

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:APPLICATION_METHOD>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE09.06.00.0610

Treatment Facility

[Treatment Facility]

Manually insert the name of the treatment facility with contact information.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TREAT_FACILITY>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0620

Registrant

[Registrant]

Manually insert the name of the registrant with contact information.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REGISTRANT>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0630

Details of method (treatment schedule)

[Details of method (treatment schedule)]

Include a title of the manufacturer/label directions, include a title of the report that documents the treatment process.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:DETAIL_METHOD>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0640

Date of application

[Date of application]

Identify how much time has elapsed between date of application and start of immersion.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:APPLICATION_DATE>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0660

Formula used to calculate the retention

[Formula used to calculate the retention]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:FORMULA_RETENTION>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0670

Conditioning procedure (type, conditions, duration)

[Conditioning procedure (type, conditions, duration)]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:COND_PROC>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0700

End sealant (specification and number of times applied)

[End sealant (specification and number of times applied)]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:END_SEALANT>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0720

Subsequent treatment (paint supplier, paint type, characteristics and loading of paint)

[Subsequent treatment (paint supplier, paint type, characteristics and loading of paint)]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:SUBS_TREAT>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.0745

Test Specimens

[Test Specimens]

SE09.06.00.0749

[Test specimens]

SE09.06.00.0750

Wood species

[Wood species]

Picklist Values:

Pinus sylvestris L. || Pinus resinosa Ait. || Pinus spp || other:

Give the species name if timbers other than the Pinus species from the picklist are used.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PHRASEOTHER_WS_LIST_POP>

<i5:WS_LIST_POP>

SE09.06.00.0751

Wood species

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PHRASEOTHER_WS_LIST_POP>

<i5:WS_LIST_POP_TXT>

SE09.06.00.0760

Source of the wood

[Source of the wood]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:SW_TEXT_BELOW>

<i5:SW_TEXT_BELOW>

SE09.06.00.0770

Density of the wood

[Density of the wood]

Picklist Values:

> || >= || ca.

Give the density of the tested wood

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_LOQUALIFIER>

SE09.06.00.0771

Density of the wood

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_LOVALUE>

SE09.06.00.0772

Density of the wood

[no label]

Picklist Values:

< || <= || ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_UPQUALIFIER>

SE09.06.00.0773

Density of the wood

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_UPVALUE>

SE09.06.00.0774

Density of the wood Unit

[Density of the wood Unit]

Picklist Values:

kg/m³

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_UNIT>

SE09.06.00.0775

Growth rate (number of annual rings per 10 mm)

[Growth rate (number of annual rings per 10 mm)]

Picklist Values:

> || >= || ca.

Give the number of annual rings per 10 mm of wood as an indicator of the tree growth rate

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_GROWTH_RATE_LOQUALIFIER>

<i5:GROWTH_RATE_LOQUALIFIER>

SE09.06.00.0776

Growth rate (number of annual rings per 10 mm)

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_GROWTH_RATE_LOQUALIFIER>

<i5:GROWTH_RATE_LOVALUE>

SE09.06.00.0777

Growth rate (number of annual rings per 10 mm)

[no label]

Picklist Values:

< || <= || ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_GROWTH_RATE_LOQUALIFIER>

<i5:GROWTH_RATE_UPQUALIFIER>

SE09.06.00.0778

Growth rate (number of annual rings per 10 mm)

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:PRECISION_GROWTH_RATE_LOQUALIFIER>

<i5:GROWTH_RATE_UPVALUE>

SE09.06.00.0780

Dimensions of the pieces of wood (in mm)

[x]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:DIMENSION1>

<i5:DIMENSION1>

SE09.06.00.0790

Dimensions of the pieces of wood (in mm)

[y]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:DIMENSION2>

<i5:DIMENSION2>

SE09.06.00.0800

Dimensions of the pieces of wood (in mm)

[z]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:DIMENSION3>

<i5:DIMENSION3>

SE09.06.00.0820

Moisture content (%)

[Moisture content (%)]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:TEST_SPECIMENS>

<i5:set>

<i5:MC_TEXT_BELOW>

<i5:MC_TEXT_BELOW>

SE09.06.00.0829

[Water samples]

SE09.06.00.0830

Mean pH of water samples

[Mean pH of water samples]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:WATER_SAMPLES>

<i5:set>

<i5:PH>

<i5:PH>

SE09.06.00.0831

Mean temperature of water samples

[Mean temperature of water samples]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:WATER_SAMPLES>

<i5:set>

<i5:MEAN_TEMP>

<i5:MEAN_TEMP>

SE09.06.00.0832

Temperature of water samples Unit

[Temperature of water samples Unit]

Picklist Values:

°C || K || °F

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:WATER_SAMPLES>

<i5:set>

<i5:TEMP_UNIT>

<i5:TEMP_UNIT>

SE09.06.00.0839

[Loading conditions]

SE09.06.00.0840

Ratio of wood weight per water volume in the immersion container

[Ratio of wood weight per water volume in the immersion container]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LOADING_CONDITIONS>

<i5:set>

<i5:WOOD_WEIGHT_PER_WATER_VOLUME>

<i5:WOOD_WEIGHT_PER_WATER_VOLUME>

SE09.06.00.0841

Ratio of wood weight per water volume Unit

[Ratio of wood weight per water volume Unit]

Picklist Values:

kg/m³

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LOADING_CONDITIONS>

<i5:set>

<i5:WOOD_WEIGHT_PER_WATER_VOLUME_UNIT>

<i5:WOOD_WEIGHT_PER_WATER_VOLUME_UNIT>

SE09.06.00.0842

Ratio of wood surface area to water volume

[Ratio of wood surface area to water volume]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LOADING_CONDITIONS>

<i5:set>

<i5:WOOD_SURFACE_PER_WATER_VOLUME>

<i5:WOOD_SURFACE_PER_WATER_VOLUME>

SE09.06.00.0843

Ratio of wood surface area to water volume Unit

[Ratio of wood surface area to water volume Unit]

Picklist Values:

m�/m�

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LOADING_CONDITIONS>

<i5:set>

<i5:WOOD_SURFACE_PER_WATER_VOLUME_UNIT>

<i5:WOOD_SURFACE_PER_WATER_VOLUME_UNIT>

SE09.06.00.0845

Any other information on materials and methods incl. tables

[Any other information on materials and methods incl. tables]

In this field, you can enter any information on materials and methods, for which no distinct field is available, or transfer free text from other databases. You can also open a rich text editor and create formatted text and tables or insert and edit any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format. Note: One rich text editor field each is provided for the MATERIALS AND METHODS and RESULTS section. In addition the fields 'Overall remarks' and 'Executive summary' allow rich text entry.

Rich text editor field for creating formatted text and tables or inserting and editing any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REM_ME_TC>

<i5:set>

<i5:RICHTEXT_BELOW>

<i5:RICHTEXT_BELOW>

SE09.06.00.0850

RESULTS AND DISCUSSION

[Results and discussions]

Main heading under which generic 'Results and discussion' fields are subsumed.

SE09.06.00.1009

Retention

[Retention]

SE09.06.00.1010

Replicate Number

[Replicate Number]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION_BLOCK>

<i5:set>

<i5:REPLICATE_NUMBER>

<i5:REPLICATE_NUMBER>

SE09.06.00.1011

Retention

[Retention]

Picklist Values:

> || >= || ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION_BLOCK>

<i5:set>

<i5:PRECISION_RETENTION_LOQUALIFIER>

<i5:RETENTION_LOQUALIFIER>

SE09.06.00.1012

Retention

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION_BLOCK>

<i5:set>

<i5:PRECISION_RETENTION_LOQUALIFIER>

<i5:RETENTION_LOVALUE>

SE09.06.00.1013

Retention

[no label]

Picklist Values:

< || <= || ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION_BLOCK>

<i5:set>

<i5:PRECISION_RETENTION_LOQUALIFIER>

<i5:RETENTION_UPQUALIFIER>

SE09.06.00.1014

Retention

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION_BLOCK>

<i5:set>

<i5:PRECISION_RETENTION_LOQUALIFIER>

<i5:RETENTION_UPVALUE>

SE09.06.00.1015

Retention Unit

[Retention Unit]

Picklist Values:

kg/m³ || L/m�

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION_BLOCK>

<i5:set>

<i5:PRECISION_RETENTION_LOQUALIFIER>

<i5:RETENTION_UNIT>

SE09.06.00.1016

Retention standard deviation

[Retention standard deviation]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION_BLOCK>

<i5:set>

<i5:RETENTION_STDDEV>

<i5:RETENTION_STDDEV>

SE09.06.00.1017

Remarks

[Remarks]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:RETENTION_BLOCK>

<i5:set>

<i5:RETENTION_REMARKS>

<i5:RETENTION_REMARKS>

SE09.06.00.1019

Leaching

[Leaching]

SE09.06.00.1020

Time

[Time]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:TIME>

<i5:TIME>

SE09.06.00.1021

Time Unit

[Time Unit]

Picklist Values:

s || min || h || d || wk || mo || yr

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:TIME_UNIT>

<i5:TIME_UNIT>

SE09.06.00.1022

Active ingredient

[Active ingredient]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:ACTIVE_INGREDIENT>

<i5:ACTIVE_INGREDIENT>

SE09.06.00.1023

Type of specimen

[Type of specimen]

Picklist Values:

treated || untreated

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:TYPE_OF_SPECIMEN>

<i5:TYPE_OF_SPECIMEN>

SE09.06.00.1024

Specimen number

[Specimen number]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:SPECIMEN_NUMBER>

<i5:SPECIMEN_NUMBER>

SE09.06.00.1025

Emission rate

[Emission rate]

Picklist Values:

> || >= || ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:PRECISION_EMISSION_RATE_LOQUALIFIER>

<i5:EMISSION_RATE_LOQUALIFIER>

SE09.06.00.1026

Emission rate

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:PRECISION_EMISSION_RATE_LOQUALIFIER>

<i5:EMISSION_RATE_LOVALUE>

SE09.06.00.1027

Emission rate

[no label]

Picklist Values:

< || <= || ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:PRECISION_EMISSION_RATE_LOQUALIFIER>

<i5:EMISSION_RATE_UPQUALIFIER>

SE09.06.00.1028

Emission rate

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:PRECISION_EMISSION_RATE_LOQUALIFIER>

<i5:EMISSION_RATE_UPVALUE>

SE09.06.00.1029

Emission rate unit

[Emission rate unit]

Picklist Values:

mg/m�/d

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:PRECISION_EMISSION_RATE_LOQUALIFIER>

<i5:EMISSION_RATE_UNIT>

SE09.06.00.1030

Remarks

[Remarks]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:LEACHING>

<i5:set>

<i5:LEACHING_REMARKS>

<i5:LEACHING_REMARKS>

SE09.06.00.1035

Validity criteria fulfilled

[Validity criteria fulfilled]

Picklist Values:

yes || no || no data || not applicable

Indicate whether the validity criteria given by test guideline have been fulfilled or not.

Indication of validity criteria and whether they have been fulfilled or not.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:VALIDITY_CRIT_FULFILLED>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX>

SE09.06.00.1036

Validity criteria fulfilled

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:VALIDITY_CRIT_FULFILLED>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX_TXT>

SE09.06.00.1040

Quality Criteria

[Quality Criteria]

Indicate if the Quality Criteria (i.e. accuracy, reproducibility and acceptable range of results) are met, and if not, what effect this has on the study's validity.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:QUALITY_CRITERIA>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE09.06.00.1045

Any other information on results incl. tables

[Any other information on results incl. tables]

In this field, you can enter any other information on results, for which no distinct field is available, or transfer free text from other databases. You can also open a rich text editor and create formatted text and tables or insert and edit any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format. Note: One rich text editor field each is provided for the MATERIALS AND METHODS and RESULTS section. In addition the fields 'Overall remarks' and 'Executive summary' allow rich text entry.

Rich text editor field for creating formatted text and tables or inserting and editing any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REM_RS>

<i5:set>

<i5:RICHTEXT_BELOW>

<i5:RICHTEXT_BELOW>

SE09.06.00.1050

OVERALL REMARKS, ATTACHMENTS

[Overall remarks, attachments]

Main heading under which 'Overall remarks, attachments' fields are subsumed.

SE09.06.00.1060

Overall remarks

[Overall remarks]

In this field, you can enter any overall remarks or transfer free text from other databases. You can also open a rich text editor and create formatted text and tables or insert and edit any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format. Note: One rich text editor field each is provided for the MATERIALS AND METHODS and RESULTS section. In addition the fields 'Overall remarks' and 'Executive summary' allow rich text entry.

Rich text editor field for creating formatted text and tables or inserting and editing any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:REM_ANYOTHER>

<i5:set>

<i5:RICHTEXT_BELOW>

<i5:RICHTEXT_BELOW>

SE09.06.00.1069

Attached background material

[Attached background material]

Attach any background document that cannot be inserted in any rich text editor field, particularly image files (e.g. an image of a structural formula). Copy this block of fields for attaching more than one file.

Heading of field block 'Attached document'.

SE09.06.00.1070

Attached document

[Attached document]

Upload file by clicking the upload icon. As appropriate, enter any additional information, e.g. language. The file name is displayed after uploading the document.

File name of document uploaded, i.e. attached. No restriction as to file type.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:AD>

<i5:set>

<i5:DOC>

<i5:DOC>

SE09.06.00.1080

Remarks

[Remarks]

As appropriate, include remarks, e.g. a short description of the content of the attached document if the file name is not self-explanatory.

Remarks on attached document.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:TO_EMISSION_PRESERVATIVE>

<i5:AD>

<i5:set>

<i5:REM>

<i5:REM>

SE09.06.00.1089

Attached full study report

[Attached full study report]

If required, an electronic copy of the full study report can be attached as WORD, pdf or other document type, which will not be integrated in any report, but must be handled as separate files. Note: In the export administration you can indicate whether the attached files should be incl