ADMINISTRATIVE DATA

REMARKS:

Under this main heading, fields are subsumed for identifying the purpose of the record (e.g., 'key study'), the type of result (e.g., 'experimental study'), data waiving indication (if any), reliability indication, and flags for indicating the regulatory purpose envisaged and/or any confidentiality restrictions. This kind of data characterise the relevance of a study summary and may therefore be displayed on top of each template. For detailed guidance, refer to Administrative data.

SE05.04.01.0215

DATA SOURCE

[Data source]

Main heading under which generic 'Data source' fields are subsumed.

SE05.04.01.0219

Reference

[Reference]

Indicate the bibliographic reference of the study report or publication the study summary is based on. Always enter the primary reference in the first block of fields (i.e. Sort no. = 1), if there are more than one reference to be cited. Copy this block of fields for specifying any other references related to this record (e.g. report of a preliminary study or other documentation). If results of a study report have been published, indicate the full citation of that publication(s) in addition to the reference of the original study.

Heading of field block 'Reference'

SE05.04.01.0220

Reference type

[Reference type]

Picklist Values:

study report || other company data || publication || review article or handbook || secondary source || grey literature || other:

Indicate the type of reference, e.g. 'Study report' or 'Publication'. Select 'Other company data' to characterise any unpublished information from a company other than a study report. Select 'Grey literature' for any other unpublished information or 'other:' and specify.

Indicator specifying the type of reference, e.g. 'Study report' or 'Publication'.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:PHRASEOTHER_REFERENCE_TYPE>

<i5:REFERENCE_TYPE>

SE05.04.01.0221

Reference type

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:PHRASEOTHER_REFERENCE_TYPE>

<i5:REFERENCE_TYPE_TXT>

SE05.04.01.0230

Author(s) (or transferred reference)

[Author]

For ease of sorting and searchability use following convention: Surname, Initial (Example 1: White D, Ruehl KJ, Borman SA & Little J. Example 2: Hartley M & Murray W (avoid unnecessary full-stops, commas)). If no individuals are cited as authors, enter name of company or organisation or 'Anon.' as appropriate.

Note that the complete bibliographic reference may appear in this field after migration of unstructured data from existing databases.

Name(s) of author(s) of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_AUTHOR>

<i5:REFERENCE_AUTHOR>

SE05.04.01.0240

Year

[Year]

Enter year of study report or publication. For a study report this field should be completed to include it in any searches, regardless of whether the complete date is given in field 'Report date'.

Year of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_YEAR>

<i5:REFERENCE_YEAR>

SE05.04.01.0250

Title

[Title]

Include the title of the report. For publications, include the title of the article of a journal or article/chapter of a book (e.g. handbook).

Title of a study report or title of published article of journal or book (e.g. handbook).

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_TITLE>

<i5:REFERENCE_TITLE>

SE05.04.01.0260

Bibliographic source

[Bibliographic source]

Not relevant for any study report. For publications or any other literature source (grey literature) specify the following type of information: (i) Title of scientific journal or book (e.g. if handbook); (ii) Volume of journal; (iii) Editor, publisher, place of publication for books or articles in books; (iv) Pagination.

Example 1 (journal): J. Agric. Food Chem. 38: 215-227

Example 2 (handbook): In: Lyman WJ (ed.) Handbook of chemical property estimation methods. Environmental behavior of organic compounds. McGraw-Hill Book Company 15.1-15.34, New York.

Bibliographic source of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_SOURCE>

<i5:REFERENCE_SOURCE>

SE05.04.01.0270

Testing laboratory

[Testing laboratory]

Either manually enter the name of the testing laboratory or select it from the picklist. In either case, editing is possible.

Name of the testing laboratory.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_TESTLAB>

<i5:REFERENCE_TESTLAB>

SE05.04.01.0280

Report no.

[Report no.]

Specify the report number allocated by the testing laboratory. Note that any company-specific study number should be included in the respective field.

Report number allocated by the testing laboratory.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_REPORT_NO>

<i5:REFERENCE_REPORT_NO>

SE05.04.01.0290

Owner company

[Owner company]

Either manually enter the identity of the company who owns the data or select it from the picklist. In either case, editing is possible.

Identity of the sponsor company who owns the study report.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_COMPANY_ID>

<i5:REFERENCE_COMPANY_ID>

SE05.04.01.0300

Company study no.

[Company study no.]

Specify any company study no. if there is such a number and if it is different from the report no. of the testing laboratory. Otherwise leave field empty.

Company-specific study number.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_COMPANY_STUDY_NO>

<i5:REFERENCE_COMPANY_STUDY_NO>

SE05.04.01.0310

Report date

[Report date]

Specify the complete date of the study report, e.g. '2005-05-12' for 12 May 2005. Note that subfield 'Year' should be completed in any case for sorting and searching purposes.

Complete date of the study report.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_REPORT_DATE>

<i5:REFERENCE_REPORT_DATE>

SE05.04.01.0320

Data access

[Data access]

Picklist Values:

data submitter is data owner || data submitter has Letter of Access || data no longer protected || data published || not applicable || other:

Select appropriate indication for data access. Enter 'Not applicable' if the summary consists of information that is commonly accessible such as guidance on safe use.

Indication for data access.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DATA_ACCESS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE05.04.01.0321

Data access

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DATA_ACCESS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE05.04.01.0330

Data protection claimed

[Data protection claimed]

Picklist Values:

yes || yes, but willing to share || yes, but not willing to share

Indicate as appropriate. Note: 'yes' should be selected only if 'Data submitter is data owner' or 'Data submitter has Letter of Access'. Options 'yes, but willing to share' or 'yes, but not willing to share' may be relevant for specific regulatory programmes where the submitter is requested to indicate whether he is willing to share studies (e.g. with vertebrates).

In the supplementary remarks field, include an explanation as appropriate, i.e. justification for denial of sharing the corresponding study or refer to a document attached that provides justification (e.g. 'for justification see attached document X')

Indication if data protection is claimed by the submitter who has to be data owner or have letter of access.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DATA_PROT_CLAIM>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX>

SE05.04.01.0331

Data protection claimed

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DATA_PROT_CLAIM>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX_TXT>

SE05.04.01.0340

Cross-reference to same study

[Cross-reference to same study]

A cross-reference can be included to indicate that the same study is recorded in another record. Indicate the respective chapter and record ID and enter relevant explanatory text. This may be useful if specific endpoints of a given study are described in another chapter (e.g. results on reproduction toxicity in case of a combined repeated dose / reproduction toxicity study) or if more than one experiment is described by the same study report, but included in separate records.

Check with the relevant guidance document whether all the methodology details must be repeated or whether a cross-reference to the same study in another chapter may suffice.

Note that any such cross-reference may become useless if a record is either printed or exchanged on its own.

Indication that the same study is described in another study summary / chapter of the data set.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:CROSSREF_SAMESTUDY>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE05.04.01.0345

MATERIALS AND METHODS

[Materials and methods]

Main heading under which generic 'Materials and methods' fields are subsumed.

SE05.04.01.0350

Study type

[Study type]

Picklist Values:

adsorption || desorption || adsorption/desorption || other:

This data entry form is mainly for entering data gained using either the batch equilibrium method or HPLC estimation method. Depending on either of these methods used, some fields or freetext templates are not applicable as indicated in the respective help text.

Qualitative screening tests based on soil thin-layer chromatography should be described in the data entry form 'Other distribution data'.

Indicator specifying whether adsorption or desorption or both were studied.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:STUDY_TYPE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE05.04.01.0351

Study type

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:STUDY_TYPE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE05.04.01.0360

Media

[Media]

Picklist Values:

soil || sediment || sewage sludge || soil/sewage sludge || other:

Indicate the medium (i.e. soil, sediment or sewage sludge) for which the adsorption (desorption) determination was made.

For the HPCL estimation method, select 'soil/sewage sludge'. For any other, select 'other' and specify.

Indicator specifying which media were used.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MEDIA>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE05.04.01.0361

Media

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MEDIA>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE05.04.01.0370

Type of method

[Type of method]

Picklist Values:

batch equilibrium method || HPLC estimation method || other:

Indicate the type of method used regardless of whether it is already specified in the guideline, as this field can be used for query purposes.

Indicator specifying which method was used, i.e. 'batch equilibrium method', 'HPLC estimation method' or 'other:' (to be specified).

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:METHOD_TYPE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE05.04.01.0371

Type of method

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:METHOD_TYPE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE05.04.01.0379

Test guideline

[Test guideline]

Indicate according to which test guideline the study was conducted. If no test guideline was explicitly followed, but the methodology used is equivalent or similar to a specific guideline, you can indicate so in the 'Qualifier' subfield preceding the field 'Guideline'.

Copy this block of fields for specifying more than one guideline (e.g. US EPA in addition to OECD guideline).

Heading of field block 'Guideline'

SE05.04.01.0380

Qualifier

[Qualifier]

Picklist Values:

according to || equivalent or similar to || no guideline followed || no guideline available || no guideline required

Select appropriate qualifier, i.e.

- 'according to' (if a given test guideline was followed);

- 'equivalent or similar to' (if no test guideline was explicitly followed, but the methodology is equivalent or similar to a specific guideline);

- 'no guideline followed' (if none of above qualifiers apply. If so, fill in field 'Principles of method if other than guideline');

- 'no guideline available' (if so, fill in field 'Principles of method if other than guideline').

- 'no guideline required' (if so, fill in field 'Principles of method if other than guideline').

An indicator signifying how strict the guideline given in the subsequent field 'Guideline' was followed or whether no guideline was used or available/required.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:GUIDELINE>

<i5:set>

<i5:QUALIFIER>

<i5:QUALIFIER>

SE05.04.01.0390

Guideline

[Guideline]

Picklist Values:

OECD Guideline 106 (Adsorption - Desorption Using a Batch Equilibrium Method) || OECD Guideline 121 (Estimation of the Adsorption Coefficient (Koc) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC)) || EU Method C.18 (Adsorption / Desorption Using a Batch Equilibrium Method) || EU Method C.19 (Estimation of the Adsorption Coefficient (KOC) on Soil and Sewage Sludge Using High Performance Liquid Chromatography (HPLC)) || EPA OPPTS 835.1110 (Activated Sludge Sorption Isotherm) || EPA OPPTS 835.1220 (Sediment and Soil Adsorption / Desorption Isotherm) || EPA OTS 796.2750 (Sediment and Soil Adsorption Isotherm) || other guideline:

Select the applicable test guideline, e.g. 'OECD Guideline xxx'. If the test guideline used is not listed, choose 'other guideline:' and specify the test guideline in the related text field.

In this text field, you can also enter any remarks as applicable, particularly:

- To include any other title of the test guideline draft used, a subtitle, another version or update number and the year of update (For instance, different titles and/or numbers may exist for a given EU test guideline.);

- To indicate if a the study was performed prior to the adoption of the test guideline specified;

- To indicate if the methodology used was based on an extension of the test guideline specified.

The name of the guideline followed in performing the study or to which the method used can be compared. Also indication if no guideline was used, available or required. In supplementary remarks field indication of guideline version or title if deviating from the picklist value, or of additional test guidelines cited.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_GUIDELINE>

<i5:GUIDELINE>

SE05.04.01.0391

Guideline

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_GUIDELINE>

<i5:GUIDELINE_TXT>

SE05.04.01.0400

Deviations from guideline

[Deviations]

Picklist Values:

yes || no || no data || not applicable

For robust study summaries or as requested by the regulatory programme, indicate if there are any deviations from the test guideline specified. If 'yes' is selected, only briefly state relevant deviations in the supplementary remarks field (e.g. 'other species used'); details should be described in the respective fields of the section MATERIALS AND METHODS.

Indication that a study contains deviations from the standard test protocol.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_DEVIATION>

<i5:DEVIATION>

SE05.04.01.0401

Deviations from guideline

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_DEVIATION>

<i5:DEVIATION_TXT>

SE05.04.01.0410

Principles of method if other than guideline

[Principles of method if other than guideline]

If no guideline was followed, include a description of the principles of the test protocol or estimated method used in the study. Details should be entered in appropriate distinct fields of section MATERIALS AND METHODS if available. Also provide a justification for using this method if appropriate.

If an estimation method was used (to be indicated in field 'Study result type') state the equation(s) and/or computer software or other methods applied to calculate the value(s).

Description of the test protocol or estimated method used in the study, if other than a guideline, and justification for using this method if appropriate.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:METHOD_NOGUIDELINE>

<i5:set>

<i5:TEXTAREA_BELOW>

<i5:TEXTAREA_BELOW>

SE05.04.01.0420

GLP compliance

[GLP compliance]

Picklist Values:

yes (incl. certificate) || yes || no || no data

Indicate whether the study was conducted following Good Laboratory Practice or not. Select 'yes (incl. certificate)' if a GLP certificate of a test facility is available. Select 'yes' if a GLP compliance statement is available, but no information on a GLP certificate. You can give an explanation in the supplementary remarks field, e.g. for explaining why GLP was not complied with or for specifying which (national) GLP was followed.

Indication whether a GLP certificate or compliance statement is available.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:GLP_COMPLIANCE_STATEMENT>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX>

SE05.04.01.0421

GLP compliance

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:GLP_COMPLIANCE_STATEMENT>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX_TXT>

SE05.04.01.0425

Test materials

[Test materials]

Subheading of section 'Test materials'

SE05.04.01.0430

Test material equivalent to submission substance identity

[Identity of test material same as for substance defined in section 1 (if not read-across)]

Picklist Values:

yes || no

Select 'yes' or 'no' from the drop-down list for indicating that the identity of the test material is the same or is not the same, respectively, as for substance defined in section 1 (General information). In addition, the identity of the test material should be specified in the subsequent block of fields 'Test material identity'.

NOTE: You cannot update this field, if a completed record is copied to another submission substance as reference. Therefore, in case of read-across the indication of 'yes' is not relevant.

Indicator showing whether the test material used is equivalent to the submission substance identity.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTMAT_INDICATOR>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE05.04.01.0439

Test material identity

[Test material identity]

Indicate the identity of the test material for one or more appropriate identifiers, e.g. CAS number, CAS name, IUPAC name. Copy this block of fields as appropriate.

NOTE: In order to avoid confusion on the test material identity it is highly recommended to enter at least one substance identifier, regardless of what has been entered in field 'Identity of test material same as for substance defined in section 1 (if not read-across)'.

Heading of field block 'Test material identity'

SE05.04.01.0440

Identifier

[Identifier]

Picklist Values:

CAS name || CAS number || Common name || EC name || EC number || IUPAC name || TSCA name || other:

Select an appropriate identifier from drop-down list, e.g. 'CAS number'. Use 'Other:' and specify, if identity according to a standard identifier is not known or if an additional chemical name or number is provided.

Indicator specifying the type of chemical identifier, e.g. CAS name.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTMAT>

<i5:set>

<i5:PHRASEOTHER_IDENTIFIER>

<i5:IDENTIFIER>

SE05.04.01.0441

Identifier

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTMAT>

<i5:set>

<i5:PHRASEOTHER_IDENTIFIER>

<i5:IDENTIFIER_TXT>

SE05.04.01.0450

Identity

[Identity]

Select the corresponding substance identity from drop-down list or enter manually if the identity is not available from the list or if no list is provided for the type of identifier selected.

Identity of the chemical substance used in the study or referred to in the record.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTMAT>

<i5:set>

<i5:ID>

<i5:ID>

SE05.04.01.0455

Physical form

[Test material form]

Picklist Values:

aerosol || compact || crystalline || dispersion || fibre || filaments || flakes || liquified gas || nanomaterial || particulates || paste || pellets || powder || refrigerated liquid || suspension || viscous || other: || no data

Select the test material form from the drop-down list. If the form of the test chemical is not available in the list, select 'other:' and specify in the adjacent field. If the test material form is unknown, select 'no data'.

Form of the substance, i.e. powder, crystalline, compact, viscous, etc.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTMAT_FORM>

<i5:set>

<i5:PHRASEOTHER_TESTMAT_FORM>

<i5:TESTMAT_FORM>

SE05.04.01.0456

Test material form

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTMAT_FORM>

<i5:set>

<i5:PHRASEOTHER_TESTMAT_FORM>

<i5:TESTMAT_FORM_TXT>

SE05.04.01.0460

Radiolabelling

[Radiolabelling]

Picklist Values:

no || yes || no data

Indicate if labelled or non-labelled test material was used. Details on labelled material to be described in field 'Details on test material'.

Indication whether labelled or non-labelled test material was used.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:RADIO_LABEL>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE05.04.01.0470

Details on test material

[Details on test material]

Freetext Templates:

- Name of test material (as cited in study report):

- Molecular formula (if other than submission substance):

- Molecular weight (if other than submission substance):

- Smiles notation (if other than submission substance):

- InChl (if other than submission substance):

- Structural formula attached as image file (if other than submission substance): see Fig.

- Substance type:

- Physical state:

- Analytical purity:

- Impurities (identity and concentrations):

- Composition of test material, percentage of components:

- Isomers composition:

- Purity test date:

- Lot/batch No.:

- Expiration date of the lot/batch:

- Radiochemical purity (if radiolabelling):

- Specific activity (if radiolabelling):

- Locations of the label (if radiolabelling):

- Expiration date of radiochemical substance (if radiolabelling):

- Stability under test conditions:

- Storage condition of test material:

- Other:

Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

Note that any information that can be claimed confidential should be included in the subsequent field 'Confidential details on test material'.

Explanations:

- Name of test material (as cited in study report): only if different from any other identifiers provided in the preceding fields.

- Molecular formula (if other than submission substance): specify

- Molecular weight (if other than submission substance): specify

- Smiles notation (if other than submission substance): provide if available

- InChl (if other than submission substance): provide if available

- Structural formula attached as image file (if other than submission substance): see Fig.: only if different from submission substance. Indicate Fig. no. if a file is attached in field 'Attached document', e.g. state 'see Fig. 1'.

- Substance type: indicate whether pure active substance, technical product, formulation or other.

- Physical state: indicate 'gas', 'solid' or 'liquid' only if different from submission substance or if substance can occur in different physical states.

- Analytical purity: specify in %

- Impurities (identity and concentrations): specify

- Composition of the test material, percentage of components: specify if applicable

- Isomers composition: specify if applicable

- Purity test date: provide if available

- Lot/batch No.: provide if available

- Expiration date of the lot/batch: provide if available

- Radiochemical purity (if radiolabelling): specify if applicable

- Specific activity (if radiolabelling): specify if applicable

- Locations of the label (if radiolabelling): specify if applicable

- Expiration date of radiochemical substance (if radiolabelling): specify if applicable

- Storage condition of test substance: specify if applicable

- Stability under test conditions: indicate if available

Details on description and specification of the actual test material.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTMAT_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0480

Confidential details on test material

[Confidential details on test material]

Freetext Templates:

- Analytical purity:

- Impurities (identity and concentrations):

- Composition of test material, percentage of components:

- Purity test date:

- Lot/batch No.:

- Expiration date of the lot/batch:

- Isomers composition:

- Other:

Enter any confidential information on the test material in this separate field. Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

Explanations:

- Analytical purity: specify in %

- Impurities (identity and concentrations): specify

- Composition of the test material, percentage of components: specify if applicable

- Purity test date: provide if available

- Lot/batch No.: : provide if available

- Expiration date of the lot/batch: : provide if available

- Isomers composition: specify if applicable

Confidential details on the actual test material.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTMAT_CONFIDENTIAL_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0490

Details on properties of test surrogate or analogue material

[Details on properties of test surrogate or analogue material]

Freetext Templates:

PHYSICO-CHEMICAL PROPERTIES

[*) Properties that should be provided for the HPLC method]

- Vapour pressure:

- Water solubility*:

- Solubility in organic solvents*:

- Dissociation constant*:

- Henry's Law constant:

- log Pow*:

- pKa:

- Base or acid catalysis of test material:

- UV absorption:

- Stability of test material at room temperature:

OTHER PROPERTIES (if relevant for this endpoint)

ONLY if another substance, i.e. analogue or surrogate (e.g. degradation/transformation product) was used as test material, enter any relevant details on the properties of this substance that may possibly affect the test performance, particularly physico-chemical properties.

Use freetext template and delete/add elements as appropriate.

Note that the physico-chemical properties of the substance for which the submission is made should be recorded in the corresponding templates and therefore need not be repeated here. Nevertheless, the possible influence of any physico-chemical properties should be indicated / discussed in appropriate fields, particularly in fields 'Details on test conditions' and 'Details on results'. This holds also true if any property of the substance is different in the test medium as compared to the data recorded in the section on physico-chemical properties, e.g. lower water solubility.

Details on properties of test material, particularly physico-chemical properties. Relevant if an analogue or surrogate was used.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:PROPERTIES_TESTMAT_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0495

Study design

[Study design]

Subheading of section 'Study design'

SE05.04.01.0500

Test temperature

[Test temperature]

Indicate test temperature values measured during test. Include range, mean, standard deviation and unit.

The temperature, preferably in °C, used in the experimental determination of the test value or assumed in the model, if estimated.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TEST_TEMP>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE05.04.01.0505

HPLC method

[HPLC method]

Subheading of section 'HPLC method'

SE05.04.01.0510

Details on study design: HPLC method

[Details on study design: HPLC method]

Freetext Templates:

EQUIPMENT

- Apparatus:

- Type:

- Type, material and dimension of analytical (guard) column:

- Detection system:

MOBILE PHASES

- Type:

- Experiments with additives carried out on separate columns: yes / no

- pH:

- Solutes for dissolving test and reference substances:

DETERMINATION OF DEAD TIME

- Method: by means of homologous series / by inert substances which are not retained by the column

REFERENCE SUBSTANCES

- Identity:

DETERMINATION OF RETENTION TIMES

- Quantity of test substance introduced in the column:

- Quantity of reference substances:

- Intervals of calibration:

REPETITIONS

- Number of determinations:

EVALUATION

- Calculation of capacity factors k':

- Calculation of retention times:

- Determination of the log Koc value:

For the HPLC method only, enter any details on the study design that could be relevant for evaluating this study summary.

Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

Details on study design: HPLC method.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:STUDY_DESIGN_HPLC_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0515

Batch equilibrium or other method

[Batch equilibrium or other method]

Subheading of section 'Batch equilibrium or other method'

SE05.04.01.0520

Analytical monitoring

[Analytical monitoring]

Picklist Values:

yes || no || no data || not required

Indicate whether test substance was monitored in the test solutions.

For robust study summaries or as requested by the regulatory programme, provide further details on sampling and analytical methods in the corresponding freetext fields.

Indicator that instrumental analyses were applied to detect the precise amount of chemical exposed to the organisms throughout the experiment.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ANALYT_MONIT>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE05.04.01.0530

Details on sampling

[Details on sampling]

Freetext Templates:

- Concentrations:

- Sampling interval:

- Sample storage before analysis:

If the amount of test material in the test solutions was monitored, enter details on sampling. Use freetext template as appropriate and delete/add elements as appropriate.

Details on sampling.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:SAMPLING_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0540

Details on analytical methods

[Details on analytical methods]

Freetext Templates:

DETAILS ON PRETREATMENT

- Centrifugation:

- Filtration:

- Digestion (acid used, method: e.g. micro-oven):

- Extraction (solvent used, method: e.g. liquid-liquid, SPE):

- Total 14C measurement:

- Clean up method: e.g. chemical used for chemistry method (Cu, Hg, ...) or phase and solvent used for SPE method:

- Derivatisation method if used:

- Concentration (method):

IDENTIFICATION AND QUANTIFICATION OF TEST SUBSTANCE/PRODUCT

- Separation method (e.g. HPLC, GC):

- Conditions (column, mobile phase, etc.):

- Detection method (e.g. ECD, UV, MS, ICP-AES, ICP-MS):

- Detection limits (LOD, LOQ) (indicate method of determination/calculation):

- Reproducibility in % (indicate method of evaluation; should be given for stated concentration levels):

- Linearity range:

- Internal or external calibration:

- Extraction recovery (indicate if results are corrected or not for recoveries):

- Method of confirmation of identity of measured compound:

IDENTIFICATION AND QUANTIFICATION OF TRANSFORMATION PRODUCTS

Briefly describe the identification and quantification methods as well as detection limits (LOD, LOQ)

If the amount of test material in the test solutions was monitored, enter any details on the analytical methods used. Use freetext template and delete/add elements as appropriate.

Details on the analytical method used.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ANALYT_METHOD_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0550

Details on matrix

[Details on matrix]

Freetext Templates:

COLLECTION AND STORAGE

- Geographic location:

- Collection procedures:

- Sampling depth (cm):

- Storage conditions:

- Storage length:

- Soil preparation (e.g.: 2 mm sieved; air dried etc.):

PROPERTIES

- Soil texture

- % sand:

- % silt:

- % clay:

- Horizon:

- Soil taxonomic classification:

- Soil classification system:

- Soil series:

- Soil order:

- pH:

- Organic carbon (%):

- CEC (meq/100 g):

- Carbonate as CaCO3:

- Insoluble carbonates (%):

- Extractable Cations (Ca, Mg, Na, K, H) (MEQ/100 g):

- Special chemical/mineralogical features:

- Clay fraction mineralogy:

- Moisture at 1/3 atm (%):

- Bulk density (g/cm3):

- Biomass (e.g. in mg microbial C/100 mg, CFU or other):- Details on collection (e.g. location, depth, contamination history, procedure:

- Storage conditions:

- Textural classification (i.e. %sand/silt/clay):

- pH at time of collection:

- Organic carbon (%):

- Electrical conductivity:

- Redox potential (mv) initial/final:

- Bulk density (g/cm³):

- Biomass (e.g. in mg microbial C/100 mg, CFU or other):- Type of sludge:

- Source of sludge:

- Oxygen status:

- Laboratory culture:

- Method of cultivation:

- Pretreatment:

- Initial cell/biomass concentration:

PREPARATION OF SLUDGE SOLIDS

- Separation from wastewater:

- Further preparation procedures:

- Details of lyophilization:

- Details of desiccation:

Depending on the test system, i.e. water-soil or water-sediment or water-activated sludge simulation system, include details on either the soil, sediment or sludge solids used in the study. Select respective freetext template and delete/add elements as appropriate. As an alternative option, include or attach an excerpt from the study report.

Details on matrix.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MATRIX_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0560

Details on study design

[Details on test conditions]

REMARKS:

Available predefined table(s) are displayed below, after this template. See also List of Predefined Tables in Annex 2.

Freetext Templates:

TEST CONDITIONS

- Buffer:

- pH:

- Suspended solids concentration:

- other:

TEST SYSTEM

- Type, size and further details on reaction vessel:

- Water filtered (i.e. yes/no; type of size of filter used, if any):

- Amount of soil/sediment/sludge and water per treatment (if simulation test):

- Soil/sediment/sludge-water ratio (if simulation test):

- Number of reaction vessels/concentration:

- Measuring equipment:

- Test performed in closed vessels due to significant volatility of test substance:

- Test performed in open system:

- Method of preparation of test solution:

- Are the residues from the adsorption phase used for desorption:

- Other:

Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

As appropriate or requested by the regulatory programme include tables in the rich text field 'Any other information on results incl. tables' summarising the study design for the adsorption and desorption phase. Upload predefined table(s) if any or adapt table(s) from study report. Use table numbers in the sequence in which you refer to them in the text (e.g. '... see Table 1').

Details on study design

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TESTCONDIT_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0569

Duration of adsorption equilibration at given conditions

[Duration of adsorption equilibration]

Indicate sample number (if multiple types of soil/sediment/sludge were used), indicate temperature and initial pH and test substance concentration at which adsorption was conducted and the respective test duration. If test runs with different conditions and durations were performed, copy this block of fields as appropriate.

Heading of field block 'Duration of adsorption equilibration'.

SE05.04.01.0570

Sample No.

[Sample No.]

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10

Select a consecutive sample number from drop-down list if more than one matrix types were used.

Indication of a consecutive sample number 1-n used to distinguish multiple soil or sediment types examined.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:SAMPLE>

<i5:SAMPLE>

SE05.04.01.0580

Duration

[Duration]

Enter numeric value.

Numeric value of duration of test.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:VALUEUNIT_VALUE>

<i5:VALUE>

SE05.04.01.0590

Unit

[Duration of adsorption equilibration]

Picklist Values:

min || h || d || wk || mo || yr

Select from drop-down list.

Unit of test duration.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:VALUEUNIT_VALUE>

<i5:UNIT>

SE05.04.01.0600

Initial measured concentration

[Initial conc. measured]

Picklist Values:

> || >= || ca.

Enter numeric value.

Initial test substance concentration: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:PRECISION_INITIAL_CONC_LOQUALIFIER>

<i5:INITIAL_CONC_LOQUALIFIER>

SE05.04.01.0610

Initial measured concentration

[no label]

Initial test substance concentration: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:PRECISION_INITIAL_CONC_LOQUALIFIER>

<i5:INITIAL_CONC_LOVALUE>

SE05.04.01.0620

Initial measured concentration

[no label]

Picklist Values:

< || <= || ca.

Initial test substance concentration: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:PRECISION_INITIAL_CONC_LOQUALIFIER>

<i5:INITIAL_CONC_UPQUALIFIER>

SE05.04.01.0630

Initial measured concentration

[no label]

Initial test substance concentration: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:PRECISION_INITIAL_CONC_LOQUALIFIER>

<i5:INITIAL_CONC_UPVALUE>

SE05.04.01.0640

Unit

[Duration of adsorption equilibration]

Picklist Values:

mg/kg soil d.w. || mg/kg sediment d.w. || mg/kg sludge solids || other:

Select from drop-down list.

Unit of initial test substance concentration.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:PRECISION_INITIAL_CONC_LOQUALIFIER>

<i5:INITIAL_CONC_UNIT>

SE05.04.01.0641

Unit

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:PRECISION_INITIAL_CONC_LOQUALIFIER>

<i5:INITIAL_CONC_UNIT_TXT>

SE05.04.01.0650

pH

[pH]

Enter the initial pH.

pH values to which the duration given applies.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:PH>

<i5:PH>

SE05.04.01.0660

Temperature

[Temp.]

Enter the temperature with unit (normally °C) during adsorption.

Temperature with unit (normally °C) to which the duration given applies.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_ADSORP>

<i5:set>

<i5:TEMP>

<i5:TEMP>

SE05.04.01.0669

Duration of desorption equilibration at given conditions

[Duration of desorption equilibration]

Indicate sample number (if multiple types of soil/sediment/sludge were used), temperature and amount of test substance concentration in the adsorbed state and the respective test duration. If test runs with different conditions and durations were performed, copy this block of fields as appropriate.

Heading of field block 'Duration of desorption equilibration'.

SE05.04.01.0670

Sample No.

[Sample No.]

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10

Select a consecutive sample number from drop-down list if more than one matrix types were used.

Indication of a consecutive sample number 1-n used to distinguish multiple soil or sediment types examined.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_DESORP>

<i5:set>

<i5:SAMPLE>

<i5:SAMPLE>

SE05.04.01.0680

Duration

[Duration]

Enter numeric value.

Numeric value of duration of test.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_DESORP>

<i5:set>

<i5:VALUEUNIT_VALUE>

<i5:VALUE>

SE05.04.01.0690

Unit

[Duration of desorption equilibration]

Picklist Values:

min || h || d || wk || mo || yr

Select from drop-down list.

Unit of test duration.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_DESORP>

<i5:set>

<i5:VALUEUNIT_VALUE>

<i5:UNIT>

SE05.04.01.0700

Amount of test material present in the adsorbed state

[Conc. of adsorbed test mat.]

Enter numeric value.

Numeric value of adsorbed test substance concentration.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_DESORP>

<i5:set>

<i5:VALUEUNIT_CONC_VALUE>

<i5:CONC_VALUE>

SE05.04.01.0710

Unit

[Duration of desorption equilibration]

Picklist Values:

mg/kg soil d.w. || mg/kg sediment d.w. || mg/kg sludge solids || other:

Select from drop-down list.

Unit of adsorbed test substance concentration.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_DESORP>

<i5:set>

<i5:VALUEUNIT_CONC_VALUE>

<i5:CONC_UNIT>

SE05.04.01.0711

Unit

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_DESORP>

<i5:set>

<i5:VALUEUNIT_CONC_VALUE>

<i5:CONC_UNIT_TXT>

SE05.04.01.0720

pH

[pH]

Enter the pH during desorption.

pH values to which the duration given applies.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_DESORP>

<i5:set>

<i5:PH>

<i5:PH>

SE05.04.01.0730

Temperature

[Temp.]

Enter the temperature with unit (normally °C) during desorption.

Temperature with unit (normally °C) to which the duration given applies.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:DURATION_DESORP>

<i5:set>

<i5:TEMP>

<i5:TEMP>

SE05.04.01.0740

Computational methods

[Computational methods]

Freetext Templates:

- Adsorption and desorption coefficients (Kd):

- Freundlich adsorption and desorption coefficients:

- Slope of Freundlich adsorption/desorption isotherms:

- Adsorption coefficient per organic carbon (Koc):

- Regression coefficient of Freundlich equation

- Other:

Enter details on computational methods used to calculate relevant parameters. Use freetext template and delete/add elements as appropriate. As an option you may include an excerpt from the study report.

Computational methods used to calculate relevant parameters.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:COMPUTATIONAL_METHODS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0750

Any other information on materials and methods incl. tables

[Any other information on materials and methods incl. tables]

In this field, you can enter any information on materials and methods, for which no distinct field is available, or transfer free text from other databases. You can also open a rich text editor and create formatted text and tables or insert and edit any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

Note: One rich text editor field each is provided for the MATERIALS AND METHODS and RESULTS section. In addition the fields 'Overall remarks' and 'Executive summary' allow rich text entry.

Rich text editor field for creating formatted text and tables or inserting and editing any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REM_ME_TC>

<i5:set>

<i5:RICHTEXT_BELOW>

<i5:RICHTEXT_BELOW>

SE05.04.01.0751

Adsorption coefficient

[Adsorption coefficient]

Include the adsorption coefficient Koc, log Koc and/or Kd. If required, copy block of fields to include several parameters.

Numeric value(s) of adsorption coefficient per organic carbon.

SE05.04.01.0752

Adsorption coefficient

[Type]

Picklist Values:

Koc || log Koc || Kd || other:

Indicate the type of adsorption coefficient, i.e. Koc, log Koc, Kd or 'other:'

Numeric value(s) of adsorption coefficient per organic carbon.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PHRASEOTHER_TYPE>

<i5:TYPE>

SE05.04.01.0753

Adsorption coefficient

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PHRASEOTHER_TYPE>

<i5:TYPE_TXT>

SE05.04.01.0755

RESULTS AND DISCUSSION

[Results and discussions]

Main heading under which generic 'Results and discussion' fields are subsumed.

SE05.04.01.0760

Adsorption coefficient Koc

[Value]

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Adsorption coefficient per organic carbon: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOQUALIFIER>

SE05.04.01.0770

Adsorption coefficient Koc

[no label]

Adsorption coefficient per organic carbon: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOVALUE>

SE05.04.01.0780

Adsorption coefficient Koc

[no label]

Picklist Values:

< || <= || ca.

Adsorption coefficient per organic carbon: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPQUALIFIER>

SE05.04.01.0790

Adsorption coefficient Koc

[no label]

Adsorption coefficient per organic carbon: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPVALUE>

SE05.04.01.0791

Temperature

[Temperature]

Enter numeric value.

Numeric value(s) of adsorption coefficient per organic carbon.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:VALUEUNIT_TEMP_VALUE>

<i5:TEMP_VALUE>

SE05.04.01.0792

Unit

[Adsorption coefficient]

Picklist Values:

°C || K || °F

Select from drop-down list.

Numeric value(s) of adsorption coefficient per organic carbon.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:VALUEUNIT_TEMP_VALUE>

<i5:TEMP_UNIT>

SE05.04.01.0793

% Org. carbon

[% Org. carbon]

Picklist Values:

> || >= || ca.

Specify the percentage of organic carbon.

Numeric value(s) of adsorption coefficient per organic carbon.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PRECISION_OC_LOQUALIFIER>

<i5:OC_LOQUALIFIER>

SE05.04.01.0794

% Org. carbon

[no label]

Numeric value(s) of adsorption coefficient per organic carbon.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PRECISION_OC_LOQUALIFIER>

<i5:OC_LOVALUE>

SE05.04.01.0795

% Org. carbon

[no label]

Picklist Values:

< || <= || ca.

Numeric value(s) of adsorption coefficient per organic carbon.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PRECISION_OC_LOQUALIFIER>

<i5:OC_UPQUALIFIER>

SE05.04.01.0796

% Org. carbon

[no label]

Numeric value(s) of adsorption coefficient per organic carbon.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:PRECISION_OC_LOQUALIFIER>

<i5:OC_UPVALUE>

SE05.04.01.0797

Remarks

[Remarks]

Enter any remarks related to the recorded value as appropriate, e.g. details on soil.

Numeric value(s) of adsorption coefficient per organic carbon.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_KOC>

<i5:set>

<i5:REMARKS>

<i5:REMARKS>

SE05.04.01.0800

[Other adsorption coefficients]

Include any other adsorption coefficient. If required, copy block of fields to include several parameters.

SE05.04.01.0801

Type

[Type]

Picklist Values:

log Kp (solids-water in soil) || log Kp (solids-water in sediment) || log Kp (solids-water in suspended matter) || log Kp (solids-water in raw sewage sludge) || log Kp (solids-water in settled sewage sludge) || log Kp (solids-water in activated sewage sludge) || log Kp (solids-water in effluent sewage sludge) || log Kp (soil-water) || log Kp (suspended matter-water) || log Kp (sediment-water) || other:

Indicate the type of adsorption coefficient, e.g. log Kp (solids-water), or select 'other:' and specify.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_OTHER>

<i5:set>

<i5:PHRASEOTHER_TYPE>

<i5:TYPE>

SE05.04.01.0802

Type

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_OTHER>

<i5:set>

<i5:PHRASEOTHER_TYPE>

<i5:TYPE_TXT>

SE05.04.01.0803

Value

[Value]

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_OTHER>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOQUALIFIER>

SE05.04.01.0804

Value

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_OTHER>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOVALUE>

SE05.04.01.0805

Value

[no label]

Picklist Values:

< || <= || ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_OTHER>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPQUALIFIER>

SE05.04.01.0806

Value

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_OTHER>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPVALUE>

SE05.04.01.0807

Unit

[Other adsorption coefficients]

Picklist Values:

L/kg

Select from drop-down list.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_OTHER>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UNIT>

SE05.04.01.0808

Remarks

[Remarks]

Enter any remarks related to the recorded value as appropriate.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:ADSORPTION_OTHER>

<i5:set>

<i5:REM>

<i5:REM>

SE05.04.01.0809

Results: HPLC method

[Results: HPLC method]

Subheading of section 'Results: HPLC method'

SE05.04.01.0840

Details on results (HPLC method)

[Details on results (HPLC method)]

Freetext Templates:

- Retention times of reference substances used for calibration:

- Details of fitted regression line (log k' vs. log Koc):

- Graph of regression line attached

- Average retention data for test substance:

For the HPLC method only, include further data as indicated in the freetext template.

Further details on results (HPLC method).

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:RESULTS_HPLC_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.0845

Results: Batch equilibrium or other method

[Results: Batch equilibrium or other method]

Subheading of section 'Results: Batch equilibrium or other method'

SE05.04.01.0850

Adsorption and desorption constants

[Adsorption and desorption constants]

REMARKS:

Available predefined table(s) are displayed below, after this template. See also List of Predefined Tables in Annex 2.

For each soil used provide adsorption and desorption constants including data on the slope of Freundlich adsorption/desorption isotherms (1/N) and regression coefficient of Freundlich equation (R2). Upload predefined table as appropriate or requested by the regulatory programme in the rich text field 'Any other information on results incl. tables' or adapt table(s) from study report. Use table numbers in the sequence in which you refer to them in the text (e.g. '... see Table 1').

Further details on adsorption and desorption constants

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:CONSTANTS_DETAILS>

<i5:set>

<i5:TEXT_INT>

<i5:TEXT_INT>

SE05.04.01.0860

Recovery of test material

[Recovery of test material]

REMARKS:

Available predefined table(s) are displayed below, after this template. See also List of Predefined Tables in Annex 2.

Indicate recovery of test material in supernatant solution and solid phase as well as non-extractable residues after adsorption/desorption, including mean standard deviation. Upload predefined table as appropriate or requested by the regulatory programme in the rich text field 'Any other information on results incl. tables' or adapt table(s) from study report. Use table numbers in the sequence in which you refer to them in the text (e.g. '... see Table 1').

Recovery of test material in sorbent material after adsorption/desorption.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:RECOVERY_TS>

<i5:set>

<i5:TEXT_INT>

<i5:TEXT_INT>

SE05.04.01.0870

Concentration of test substance at end of adsorption equilibration period

[Concentration of test substance at end of adsorption equilibration period]

REMARKS:

Available predefined table(s) are displayed below, after this template. See also List of Predefined Tables in Annex 2.

Give concentration of test substance in solid and liquid phases at the end of adsorption equilibration period and percent adsorbed test material of applied, including standard deviation; indicate whether the amount on sorbent residue is measured by sorbent residue analysis or calculated by difference (total applied - concentration in solution). Upload predefined table as appropriate or requested by the regulatory programme in the rich text field 'Any other information on results incl. tables' or adapt table(s) from study report. Use table numbers in the sequence in which you refer to them in the text (e.g. '... see Table 1').

Concentration of test substance in solid and liquid phases at the end of adsorption equilibration period

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TSCONC_ADSORPT>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE05.04.01.0880

Concentration of test substance at end of desorption equilibration period

[Concentration of test substance at end of desorption equilibration period]

REMARKS:

Available predefined table(s) are displayed below, after this template. See also List of Predefined Tables in Annex 2.

Give concentration of test substance in solid and liquid phases at the end of desorption equilibration period and percent desorbed test material of adsorbed, including standard deviation; indicate whether the amount on sorbent residue is measured by sorbent residue analysis or calculated by difference (total applied - concentration in solution). Upload predefined table as appropriate or requested by the regulatory programme in the rich text field 'Any other information on results incl. tables' or adapt table(s) from study report. Use table numbers in the sequence in which you refer to them in the text (e.g. '... see Table 1').

Concentration of test substance in solid and liquid phases at the end of desorption equilibration period

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TSCONC_DESORPT>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE05.04.01.0889

Mass balance (%) at end of adsorption phase

[Mass balance (%) at end of adsorption phase]

Indicate sample number (if multiple types of soil/sediment/sludge were used), duration of end of adsorption phase and include the respective mass balance as % of the applied test substance. For indicating values for different soil (samples), copy this block of fields as appropriate.

Heading of field block 'Mass balance (%) at end of adsorption phase'

SE05.04.01.0890

Sample No.

[Sample No.]

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10

Select a consecutive sample number from drop-down list if more than one matrix types were used.

Indication of a consecutive soil number 1-n used to distinguish the soil types examined.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_ADSORP>

<i5:set>

<i5:SAMPLE>

<i5:SAMPLE>

SE05.04.01.0900

Duration (end of adsorption phase)

[Duration]

Enter numeric value.

Numeric value of duration (end of adsorption phase)

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_ADSORP>

<i5:set>

<i5:VALUEUNIT_DURATION_VALUE>

<i5:DURATION_VALUE>

SE05.04.01.0910

Unit

[Mass balance (%) at end of adsorption phase]

Picklist Values:

min || h || d || wk || mo || yr

Select from drop-down list.

Unit of test duration.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_ADSORP>

<i5:set>

<i5:VALUEUNIT_DURATION_VALUE>

<i5:DURATION_UNIT>

SE05.04.01.0920

% adsorption

[% adsorption]

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Mass balance at the end of adsorption phase as % of the applied test substance: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_ADSORP>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOQUALIFIER>

SE05.04.01.0930

% adsorption

[no label]

Mass balance at the end of adsorption phase as % of the applied test substance: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_ADSORP>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOVALUE>

SE05.04.01.0940

% adsorption

[no label]

Picklist Values:

< || <= || ca.

Mass balance at the end of adsorption phase as % of the applied test substance: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_ADSORP>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPQUALIFIER>

SE05.04.01.0950

% adsorption

[no label]

Mass balance at the end of adsorption phase as % of the applied test substance: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_ADSORP>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPVALUE>

SE05.04.01.0959

Mass balance (%) at end of desorption phase

[Mass balance (%) at end of desorption phase]

Indicate sample number (if multiple types of soil/sediment/sludge were used), duration of end of desorption phase and include the respective mass balance as % of the applied test substance. For indicating values for different soil (samples), copy this block of fields as appropriate.

Heading of field block 'Mass balance (%) at end of desorption phase'

SE05.04.01.0960

Sample No.

[Sample No.]

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10

Select a consecutive sample number from drop-down list if more than one matrix types were used.

Indication of a consecutive soil number 1-n used to distinguish the soil types examined.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_DESORP>

<i5:set>

<i5:SAMPLE>

<i5:SAMPLE>

SE05.04.01.0970

Duration (end of desorption phase)

[Duration]

Enter numeric value.

Numeric value of duration (end of desorption phase)

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_DESORP>

<i5:set>

<i5:VALUEUNIT_DURATION_VALUE>

<i5:DURATION_VALUE>

SE05.04.01.0980

Unit

[Mass balance (%) at end of desorption phase]

Picklist Values:

min || h || d || wk || mo || yr

Select from drop-down list.

Unit of test duration.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_DESORP>

<i5:set>

<i5:VALUEUNIT_DURATION_VALUE>

<i5:DURATION_UNIT>

SE05.04.01.0990

% desorption

[% desorption]

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Mass balance at the end of desorption phase as % of the applied test substance: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_DESORP>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOQUALIFIER>

SE05.04.01.1000

% desorption

[no label]

Mass balance at the end of desorption phase as % of the applied test substance: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_DESORP>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOVALUE>

SE05.04.01.1010

% desorption

[no label]

Picklist Values:

< || <= || ca.

Mass balance at the end of desorption phase as % of the applied test substance: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_DESORP>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPQUALIFIER>

SE05.04.01.1020

% desorption

[no label]

Mass balance at the end of desorption phase as % of the applied test substance: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:MASSBAL_DESORP>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPVALUE>

SE05.04.01.1030

Transformation products

[Transformation products]

Picklist Values:

no || not measured || yes || no data

Indicate occurrence of transformation products.

Indicator that transformation products occurred or not.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TRANSF_PRODUCTS_INDICATOR>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE05.04.01.1039

Identity of transformation products

[Identity of degradation products]

Indicate the identity of the transformation products using an appropriate identifier, e.g. CAS number, CAS name, IUPAC name. Copy this block of fields for each relevant substance.

Any further details on transformation products can be provided in field 'Any other information on materials and methods incl. tables'.

Heading of field block 'Identity of degradation / transformation products'.

SE05.04.01.1040

No.

[No.]

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10 || #11 || #12 || #13 || #14 || #15 || #16 || #17 || #18 || #19 || #20

For easier distinction select a consecutive number for each transformation product from drop-down list if more than one transformation product is entered. If the same substance is identified by more than one identifiers (e.g. by CAS name and Common name), make sure that the same number is allocated to these entries.

Indication of a consecutive number 1-n used to distinguish the degradation / transformation products.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TRANSF_PRODUCTS_ID>

<i5:set>

<i5:NO>

<i5:NO>

SE05.04.01.1050

Identifier

[Identifier]

Picklist Values:

CAS name || CAS number || Common name || EC name || EC number || IUPAC name || TSCA name || other:

Select an appropriate identifier from drop-down list, e.g. 'CAS number'. Use 'Other:' if identity according to a standard identifier is not known. Specify if another identifier is provided (e.g. 'Other: xxx').

Indicator specifying the type of chemical identifier, e.g. CAS name.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TRANSF_PRODUCTS_ID>

<i5:set>

<i5:PHRASEOTHER_IDENTIFIER>

<i5:IDENTIFIER>

SE05.04.01.1051

Identifier

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TRANSF_PRODUCTS_ID>

<i5:set>

<i5:PHRASEOTHER_IDENTIFIER>

<i5:IDENTIFIER_TXT>

SE05.04.01.1060

Identity

[Identity]

Select the corresponding substance identity from drop-down list or enter manually if the identity is not available from the list or if no list is provided for the type of identifier selected.

Identity of the chemical substance.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:TRANSF_PRODUCTS_ID>

<i5:set>

<i5:ID>

<i5:ID>

SE05.04.01.1070

Details on results (Batch equilibrium method)

[Details on results (Batch equilibrium method)]

Freetext Templates:

PRELIMINARY TEST

- Sample purity:

- Weighed soil:

- Volume of CaCl2 solution:

- Initial test substance concentration:

- Test substance concentration in final solution:

- Analytical test substance concentration in final solution:

- Other:

MAIN TEST: PERFORMANCE

- Test material stability during adsorption/desorption phase:

- Experimental conditions maintained throughout the study: Yes/No

- Buffer/test substance interactions affecting sorption:

- Further chemical interactions:

- Buffer-catalyzed degradation of test substance:

- Anomalies or problems encountered (if yes):

- Other observations:

TRANSFORMATION PRODUCTS

- Range of maximum concentrations in % of the applied amount:

RESIDUES

- Total unidentified radioactivity (range) of applied amount:

- Extractable residues (% of applied amount at end of study period):

- Non-extractable residues (% of applied amount at end of study period):

VOLATILIZATION

- % of the applied radioactivity present as volatile organics at end of study:

RESULTS OF SUPPLEMENTARY EXPERIMENT (if any):

Indicate any further relevant details of test results. Use freetext template and delete/add elements as appropriate. As an option you may include an excerpt from the study report.

Details on results (Batch equilibrium method)

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:RESULTS_BATCH_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.04.01.1080

Statistics

[Statistics]

Indicate the parameters analyzed, the statistical method used and the statistical test performed.

Indication of parameters analyzed, the statistical method used and the statistical test performed.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:STATISTICS>

<i5:set>

<i5:TEXT_INT>

<i5:TEXT_INT>

SE05.04.01.1090

Any other information on results incl. tables

[Any other information on results incl. tables]

In this field, you can enter any other remarks on results. You can also open a rich text editor and create formatted text and tables or insert and edit any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

Note: Both the 'Materials and methods' section and 'Results' section. In addition the fields 'Overall remarks' and 'Executive summary' allow rich text entry.

Rich text editor field for creating formatted text and tables or inserting and editing any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REM_RS>

<i5:set>

<i5:RICHTEXT_BELOW>

<i5:RICHTEXT_BELOW>

SE05.04.01.1095

OVERALL REMARKS, ATTACHMENTS

[Overall remarks, attachments]

Main heading under which 'Overall remarks, attachments' fields are subsumed.

SE05.04.01.1100

Remarks on results including tables and figures

[Remarks on results including tables and figures]

In this field, you can enter any overall remarks or transfer free text from other databases. You can also open a rich text editor and create formatted text and tables or insert and edit any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

Note: One rich text editor field each is provided for the MATERIALS AND METHODS and RESULTS section. In addition the fields 'Overall remarks' and 'Executive summary' allow rich text entry.

Rich text editor field for creating formatted text and tables or inserting and editing any excerpt from a word processing or spreadsheet document, provided it was converted to the HTML format.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:REM_ANYOTHER>

<i5:set>

<i5:RICHTEXT_BELOW>

<i5:RICHTEXT_BELOW>

SE05.04.01.1109

Attached background material

[Attached background material]

Attach any background document that cannot be inserted in any rich text editor field, particularly image files (e.g. an image of a structural formula).

Copy this block of fields for attaching more than one file.

Heading of field block 'Attached document'.

SE05.04.01.1110

Attached document

[Attached document]

Upload file by clicking the upload icon. As appropriate, enter any additional information, e.g. language. The file name is displayed after uploading the document.

File name of document uploaded, i.e. attached. No restriction as to file type.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:AD>

<i5:set>

<i5:DOC>

<i5:DOC>

SE05.04.01.1120

Remarks

[Remarks]

As appropriate, include remarks, e.g. a short description of the content of the attached document if the file name is not self-explanatory.

Remarks on attached document.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:AD>

<i5:set>

<i5:REM>

<i5:REM>

SE05.04.01.1129

Attached full study report

[Attached full study report]

If required, an electronic copy of the full study report can be attached as WORD, pdf or other document type, which will not be integrated in any report, but must be handled as separate files.

Note: In the export administration you can indicate whether the attached files should be included in the data export or not.

Attached full study report

SE05.04.01.1130

Attached full study report

[Attached full study report]

Upload file by clicking the upload icon. As appropriate, enter any additional information, e.g. language. The file name is displayed after uploading the document.

Attached full study report

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:AD_STUDYREPORT>

<i5:set>

<i5:ATTACHMENT_BELOW>

<i5:ATTACHMENT_BELOW>

SE05.04.01.1132

Illustration (picture/graph)

[Illustration (picture/graph)]

Upload file by clicking the upload icon. As appropriate, enter any additional information, e.g. language. The file name is displayed after uploading the document.

Illustration (picture/graph)

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:PG_ILLUSTRATION>

<i5:set>

<i5:PIC_BELOW>

<i5:PIC_BELOW>

SE05.04.01.1135

APPLICANT'S SUMMARY AND CONCLUSION

[Applicant's summary and conclusion]

Main heading under which generic 'Applicant's summary and conclusion' fields are subsumed.

SE05.04.01.1140

Validity criteria fulfilled

[Validity criteria fulfilled]

Picklist Values:

yes || no || no data || not applicable

Indicate whether validity criteria given by test guideline have been fulfilled or not. Use supplementary remarks field for indicating the criteria and entering remarks. Clearly indicate if the criteria used are not consistent with those given by the test guideline. If so, give justification in field 'Rationale for reliability incl. deficiencies' as to why this study summary is considered reliable.

Indication of validity criteria and whether they have been fulfilled or not.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:VALIDITY_CRIT_SUBM>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX>

SE05.04.01.1141

Validity criteria fulfilled

[no label]

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:VALIDITY_CRIT_SUBM>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX_TXT>

SE05.04.01.1150

Conclusions

[Conclusions]

Enter any conclusions if applicable.

Any conclusions either as adapted from the study report / publication or indicated by the submitter.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:APPL_CL>

<i5:set>

<i5:TEXTAREA_BELOW>

<i5:TEXTAREA_BELOW>

SE05.04.01.1160

Executive summary

[Executive summary]

REMARKS:

Available predefined executive summary is shown below, at the end of this template. See also List of Predefined Executive Summaries in Annex 3.

If required by the respective national/regional programme, briefly summarise the relevant aspects of the study including the conclusions reached. If a specific format is prescribed, upload the respective freetext template if available from the drop-down list or copy it from the corresponding document.

Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

Executive summary in which the relevant aspects of the study including the conclusions reached are briefly summarised.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:APPL_EXEC_SUM>

<i5:set>

<i5:RICHTEXT_BELOW>

<i5:RICHTEXT_BELOW>

SE05.04.01.1170

Cross-reference to other study

[Cross-reference to other study]

A Cross-reference to other study or other studies can be included which are considered relevant in the interpretation of the test results, e.g. for supporting the conclusion that an effect observed was not substance-related. Indicate the respective chapter(s) and record ID(s) and enter relevant explanatory text.

Such cross-references may be useful if it is considered relevant to discuss other results at the summary level of a single study. It should be noted that the overall appraisal of results from different studies is normally done in the hazard or risk assessment.

Note that any such cross-reference may become useless if a record is either printed or exchanged on its own.

A cross-reference to another study or other studies including explanatory text on why other results are relevant in the interpretation of the results of a given study, e.g. for supporting any conclusions.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_ADSORPTION>

<i5:CROSSREF_OTHER_STUDY>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>