OECD Template #30: Biodegradation in soil (Version 2-June 2012)

The following table gives a detailed description of the type of information prompted for by the data entry fields. Elements provided to guide the user include predefined picklist phrases, freetext templates and context-sensitive help texts. In addition, technical elements are provided, i.e. field and data types, explanations for use in Data Element Dictionary (DED) and the xml schema. The conventions used are explained in part 'Introduction and Format of OECD Harmonised Templates'.

Field number

Field description

[Field label]

  1. Field type
  2. Data type
  3. Group ID
  4. Max occ.
  5. Detail level
  6. Picklist code

Remarks, Picklist, Freetext template

Help text

Explanation for use in Data Element Dictionary (DED)

XML Schema

 

ADMINISTRATIVE DATA

 

REMARKS:

Under this main heading, fields are subsumed for identifying the purpose of the record (e.g., 'key study'), the type of result (e.g., 'experimental study'), data waiving indication (if any), reliability indication, and flags for indicating the regulatory purpose envisaged and/or any confidentiality restrictions. This kind of data characterise the relevance of a study summary and may therefore be displayed on top of each template. For detailed guidance, refer to Administrative data.

 

 

 

SE05.02.03.0215

DATA SOURCE

[Data source]

  1. HEAD-1
  2. Heading level 1
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

Main heading under which generic 'Data source' fields are subsumed.

 

SE05.02.03.0219

Reference

[Reference]

  1. HEAD BLOCK
  2. Block label
  3. g223
  4. 10
  5. 1
  6. [N/A]

 

Indicate the bibliographic reference of the study report or publication the study summary is based on. Always enter the primary reference in the first block of fields (i.e. Sort no. = 1), if there are more than one reference to be cited. Copy this block of fields for specifying any other references related to this record (e.g. report of a preliminary study or other documentation). If results of a study report have been published, indicate the full citation of that publication(s) in addition to the reference of the original study.

Heading of field block 'Reference'

 

SE05.02.03.0220

Reference type

[Reference type]

  1. LIST-OPEN
  2. STRING/255
  3. g223
  4. 1
  5. 1
  6. Z31

Picklist Values:

study report || other company data || publication || review article or handbook || secondary source || grey literature || other:

Indicate the type of reference, e.g. 'Study report' or 'Publication'. Select 'Other company data' to characterise any unpublished information from a company other than a study report. Select 'Grey literature' for any other unpublished information or 'other:' and specify.

Indicator specifying the type of reference, e.g. 'Study report' or 'Publication'.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:PHRASEOTHER_REFERENCE_TYPE>

<i5:REFERENCE_TYPE>

SE05.02.03.0221

Reference type

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:PHRASEOTHER_REFERENCE_TYPE>

<i5:REFERENCE_TYPE_TXT>

SE05.02.03.0230

Author(s) (or transferred reference)

[Author]

  1. TEXT
  2. STRING/2000
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

For ease of sorting and searchability use following convention: Surname, Initial (Example 1: White D, Ruehl KJ, Borman SA & Little J. Example 2: Hartley M & Murray W (avoid unnecessary full-stops, commas)). If no individuals are cited as authors, enter name of company or organisation or 'Anon.' as appropriate.

Note that the complete bibliographic reference may appear in this field after migration of unstructured data from existing databases.

Name(s) of author(s) of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_AUTHOR>

<i5:REFERENCE_AUTHOR>

SE05.02.03.0240

Year

[Year]

  1. YEAR
  2. NUMBER/4/###0
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

Enter year of study report or publication. For a study report this field should be completed to include it in any searches, regardless of whether the complete date is given in field 'Report date'.

Year of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_YEAR>

<i5:REFERENCE_YEAR>

SE05.02.03.0250

Title

[Title]

  1. TEXT
  2. STRING/255
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

Include the title of the report. For publications, include the title of the article of a journal or article/chapter of a book (e.g. handbook).

Title of a study report or title of published article of journal or book (e.g. handbook).

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_TITLE>

<i5:REFERENCE_TITLE>

SE05.02.03.0260

Bibliographic source

[Bibliographic source]

  1. TEXT
  2. STRING/255
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

Not relevant for any study report. For publications or any other literature source (grey literature) specify the following type of information: (i) Title of scientific journal or book (e.g. if handbook); (ii) Volume of journal; (iii) Editor, publisher, place of publication for books or articles in books; (iv) Pagination.

Example 1 (journal): J. Agric. Food Chem. 38: 215-227

Example 2 (handbook): In: Lyman WJ (ed.) Handbook of chemical property estimation methods. Environmental behavior of organic compounds. McGraw-Hill Book Company 15.1-15.34, New York.

Bibliographic source of the study report or publication.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_SOURCE>

<i5:REFERENCE_SOURCE>

SE05.02.03.0270

Testing laboratory

[Testing laboratory]

  1. TEXT
  2. STRING/255
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

Either manually enter the name of the testing laboratory or select it from the picklist. In either case, editing is possible.

Name of the testing laboratory .

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_TESTLAB>

<i5:REFERENCE_TESTLAB>

SE05.02.03.0280

Report no.

[Report no.]

  1. TEXT
  2. STRING/255
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

Specify the report number allocated by the testing laboratory. Note that any company-specific study number should be included in the respective field.

Report number allocated by the testing laboratory.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_REPORT_NO>

<i5:REFERENCE_REPORT_NO>

SE05.02.03.0290

Owner company

[Owner company]

  1. TEXT
  2. STRING/255
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

Either manually enter the identity of the company who owns the data or select it from the picklist. In either case, editing is possible.

Identity of the sponsor company who owns the study report.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_COMPANY_ID>

<i5:REFERENCE_COMPANY_ID>

SE05.02.03.0300

Company study no.

[Company study no.]

  1. TEXT
  2. STRING/255
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

Specify any company study no. if there is such a number and if it is different from the report no. of the testing laboratory. Otherwise leave field empty.

Company-specific study number.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_COMPANY_STUDY_NO>

<i5:REFERENCE_COMPANY_STUDY_NO>

SE05.02.03.0310

Report date

[Report date]

  1. DATE
  2. DATE/255
  3. g223
  4. 1
  5. 1
  6. [N/A]

 

Specify the complete date of the study report, e.g. '2005-05-12' for 12 May 2005. Note that subfield 'Year' should be completed in any case for sorting and searching purposes.

Complete date of the study report.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:REFERENCE>

<i5:set>

<i5:REFERENCE_REPORT_DATE>

<i5:REFERENCE_REPORT_DATE>

SE05.02.03.0320

Data access

[Data access]

  1. LIST-OPEN
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. Z03

Picklist Values:

data submitter is data owner || data submitter has Letter of Access || data no longer protected || data published || not applicable || other:

Select appropriate indication for data access. Enter 'Not applicable' if the summary consists of information that is commonly accessible such as guidance on safe use.

Indication for data access.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DATA_ACCESS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE05.02.03.0321

Data access

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DATA_ACCESS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE05.02.03.0330

Data protection claimed

[Data protection claimed]

  1. LIST-CLOSED-SUP
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. Z30

Picklist Values:

yes || yes, but willing to share || yes, but not willing to share

Indicate as appropriate. Note: 'yes' should be selected only if 'Data submitter is data owner' or 'Data submitter has Letter of Access'. Options 'yes, but willing to share' or 'yes, but not willing to share' may be relevant for specific regulatory programmes where the submitter is requested to indicate whether he is willing to share studies (e.g. with vertebrates).

In the supplementary remarks field, include an explanation as appropriate, i.e. justification for denial of sharing the corresponding study or refer to a document attached that provides justification (e.g. 'for justification see attached document X')

Indication if data protection is claimed by the submitter who has to be data owner or have letter of access.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DATA_PROT_CLAIM>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX>

SE05.02.03.0331

Data protection claimed

[no label]

  1. SUP-TEXT
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DATA_PROT_CLAIM>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX_TXT>

SE05.02.03.0340

Cross-reference to same study

[Cross-reference to same study]

  1. TEXTAREA
  2. STRING/2000
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

A cross-reference can be included to indicate that the same study is recorded in another record. Indicate the respective chapter and record ID and enter relevant explanatory text. This may be useful if specific endpoints of a given study are described in another chapter (e.g. results on reproduction toxicity in case of a combined repeated dose / reproduction toxicity study) or if more than one experiment is described by the same study report, but included in separate records.

Check with the relevant guidance document whether all the methodology details must be repeated or whether a cross-reference to the same study in another chapter may suffice.

Note that any such cross-reference may become useless if a record is either printed or exchanged on its own.

Indication that the same study is described in another study summary / chapter of the data set.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:CROSSREF_SAMESTUDY>

<i5:set>

<i5:TEXT_BELOW>

<i5:TEXT_BELOW>

SE05.02.03.0345

MATERIALS AND METHODS

[Materials and methods]

  1. HEAD-1
  2. Heading level 1
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

Main heading under which generic 'Materials and methods' fields are subsumed.

 

SE05.02.03.0350

Test type

[Test type]

  1. LIST-OPEN
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. F11

Picklist Values:

field trial || laboratory || other: || no data

Indicate whether the study was a field trial or laboratory study.

Indication whether test was a field or laboratory study.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TEST_TYPE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP>

SE05.02.03.0351

Test type

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TEST_TYPE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP>

<i5:LIST_POP_TXT>

SE05.02.03.0359

Test guideline

[Test guideline]

  1. HEAD BLOCK
  2. Block label
  3. g224
  4. 5
  5. 1
  6. [N/A]

 

Indicate according to which test guideline the study was conducted. If no test guideline was explicitly followed, but the methodology used is equivalent or similar to a specific guideline, you can indicate so in the 'Qualifier' subfield preceding the field 'Guideline'.

Copy this block of fields for specifying more than one guideline (e.g. US EPA in addition to OECD guideline).

Heading of field block 'Guideline'

 

SE05.02.03.0360

Qualifier

[Qualifier]

  1. LIST-CLOSED
  2. STRING/255
  3. g224
  4. 1
  5. 1
  6. Z06

Picklist Values:

according to || equivalent or similar to || no guideline followed || no guideline available || no guideline required

Select appropriate qualifier, i.e.

- 'according to' (if a given test guideline was followed);

- 'equivalent or similar to' (if no test guideline was explicitly followed, but the methodology is equivalent or similar to a specific guideline);

- 'no guideline followed' (if none of above qualifiers apply. If so, fill in field 'Principles of method if other than guideline');

- 'no guideline available' (if so, fill in field 'Principles of method if other than guideline').

- 'no guideline required' (if so, fill in field 'Principles of method if other than guideline').

An indicator signifying how strict the guideline given in the subsequent field 'Guideline' was followed or whether no guideline was used or available/required.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:GUIDELINE>

<i5:set>

<i5:QUALIFIER>

<i5:QUALIFIER>

SE05.02.03.0370

Guideline

[Guideline]

  1. LIST-OPEN-SUP
  2. STRING/255
  3. g224
  4. 1
  5. 1
  6. F12

Picklist Values:

OECD Guideline 304 A (Inherent Biodegradability in Soil) || OECD Guideline 307 (Aerobic and Anaerobic Transformation in Soil) || EU Method C.23 (Aerobic and Anaerobic Transformation in Soil) || EPA OPPTS 835.3300 (Soil Biodegradation) || EPA OTS 796.3400 (Soil Biodegradation) || ISO/DIS 17556.2 (Plastics - Determination of the Ultimate Aerobic Biodegradability in Soil by Measuring the Oxygen Demand in a Respirometer or the Amount of Carbon Dioxide Evolved) || other guideline:

Select the applicable test guideline, e.g. 'OECD Guideline xxx'. If the test guideline used is not listed, choose 'other guideline:' and specify the test guideline in the related text field.

In this text field, you can also enter any remarks as applicable, particularly:

- To include any other title of the test guideline draft used, a subtitle, another version or update number and the year of update (For instance, different titles and/or numbers may exist for a given EU test guideline.);

- To indicate if a the study was performed prior to the adoption of the test guideline specified;

- To indicate if the methodology used was based on an extension of the test guideline specified.

The name of the guideline followed in performing the study or to which the method used can be compared. Also indication if no guideline was used, availaible or required. In supplementary remarks field indication of guideline version or title if deviating from the picklist value., or of additional test guidelines cited.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_GUIDELINE>

<i5:GUIDELINE>

SE05.02.03.0371

Guideline

[no label]

  1. SUP-TEXT
  2. STRING/255
  3. g224
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_GUIDELINE>

<i5:GUIDELINE_TXT>

SE05.02.03.0380

Deviations from guideline

[Deviations]

  1. LIST-CLOSED-SUP
  2. STRING/255
  3. g224
  4. 1
  5. 1
  6. Z08

Picklist Values:

yes || no || no data || not applicable

For robust study summaries or as requested by the regulatory programme, indicate if there are any deviations from the test guideline specified. If 'yes' is selected, only briefly state relevant deviations in the supplementary remarks field (e.g. 'other species used'); details should be described in the respective fields of the section MATERIALS AND METHODS.

Indication that a study contains deviations from the standard test protocol.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_DEVIATION>

<i5:DEVIATION>

SE05.02.03.0381

Deviations from guideline

[no label]

  1. SUP-TEXT
  2. STRING/255
  3. g224
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:GUIDELINE>

<i5:set>

<i5:PHRASEOTHER_DEVIATION>

<i5:DEVIATION_TXT>

SE05.02.03.0390

Principles of method if other than guideline

[Principles of method if other than guideline]

  1. TEXTAREA
  2. STRING/32768
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

If no guideline was followed, include a description of the principles of the test protocol or estimated method used in the study. Details should be entered in appropriate distinct fields of section MATERIALS AND METHODS if available. Also provide a justification for using this method if appropriate.

If an estimation method was used (to be indicated in field 'Study result type') state the equation(s) and/or computer software or other methods applied to calculate the value(s).

Description of the test protocol or estimated method used in the study, if other than a guideline, and justification for using this method if appropriate.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:METHOD_NOGUIDELINE>

<i5:set>

<i5:TEXTAREA_BELOW>

<i5:TEXTAREA_BELOW>

SE05.02.03.0400

GLP compliance

[GLP compliance]

  1. LIST-CLOSED-SUP
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. Z40

Picklist Values:

yes (incl. certificate) || yes || no || no data

Indicate whether the study was conducted following Good Laboratory Practice or not. Select 'yes (incl. certificate)' if a GLP certificate of a test facility is available. Select 'yes' if a GLP compliance statement is available, but no information on a GLP certificate. You can give an explanation in the supplementary remarks field, e.g. for explaining why GLP was not complied with or for specifying which (national) GLP was followed.

Indication whether a GLP certificate or compliance statement is available.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:GLP_COMPLIANCE_STATEMENT>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX>

SE05.02.03.0401

GLP compliance

[no label]

  1. SUP-TEXT
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:GLP_COMPLIANCE_STATEMENT>

<i5:set>

<i5:PHRASEOTHER_LIST_SEL_FIX>

<i5:LIST_SEL_FIX_TXT>

SE05.02.03.0405

Test materials

[Test materials]

  1. HEAD-2
  2. Heading level 2
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

Subheading of section 'Test materials'

 

SE05.02.03.0410

Test material equivalent to submission substance identity

[Identity of test material same as for substance defined in section 1 (if not read-across)]

  1. LIST-CLOSED
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. Z38

Picklist Values:

yes || no

Select 'yes' or 'no' from the drop-down list for indicating that the identity of the test material is the same or is not the same, respectively, as for substance defined in section 1 (General information). In addition, the identity of the test material should be specified in the subsequent block of fields 'Test material identity'.

NOTE: You cannot update this field, if a completed record is copied to another submission substance as reference. Therefore, in case of read-across the indication of 'yes' is not relevant.

Indicator showing whether the test material used is equivalent to the submission substance identity.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TESTMAT_INDICATOR>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE05.02.03.0419

Test material identity

[Test material identity]

  1. HEAD BLOCK
  2. Block label
  3. g225
  4. 10
  5. 1
  6. [N/A]

 

Indicate the identity of the test material for one or more appropriate identifiers, e.g. CAS number, CAS name, IUPAC name. Copy this block of fields as appropriate.

NOTE: In order to avoid confusion on the test material identity it is highly recommended to enter at least one substance identifier, regardless of what has been entered in field 'Identity of test material same as for substance defined in section 1 (if not read-across)'.

Heading of field block 'Test material identity'

 

SE05.02.03.0420

Identifier

[Identifier]

  1. LIST-OPEN
  2. STRING/255
  3. g225
  4. 1
  5. 1
  6. Z39

Picklist Values:

CAS name || CAS number || Common name || EC name || EC number || IUPAC name || TSCA name || other:

Select an appropriate identifier from drop-down list, e.g. 'CAS number'. Use 'Other:' and specify, if identity according to a standard identifier is not known or if an additional chemical name or number is provided.

Indicator specifying the type of chemical identifier, e.g. CAS name.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TESTMAT>

<i5:set>

<i5:PHRASEOTHER_IDENTIFIER>

<i5:IDENTIFIER>

SE05.02.03.0421

Identifier

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. g225
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TESTMAT>

<i5:set>

<i5:PHRASEOTHER_IDENTIFIER>

<i5:IDENTIFIER_TXT>

SE05.02.03.0430

Identity

[Identity]

  1. TEXT
  2. STRING/2000
  3. g225
  4. 1
  5. 1
  6. [N/A]

 

Select the corresponding substance identity from drop-down list or enter manually if the identity is not available from the list or if no list is provided for the type of identifier selected.

Identity of the chemical substance used in the study or referred to in the record.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TESTMAT>

<i5:set>

<i5:ID>

<i5:ID>

SE05.02.03.0435

Physical form

[Test material form]

  1. LIST-OPEN
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. A101

Picklist Values:

aerosol || compact || crystalline || dispersion || fibre || filaments || flakes || liquified gas || nanomaterial || particulates || paste || pellets || powder || refrigerated liquid || suspension || viscous || other: || no data

Select the test material form from the drop-down list. If the form of the test chemical is not available in the list, select 'other:' and specify in the adjacent field. If the test material form is unknown, select 'no data'.

Form of the substance, i.e. powder, crystalline, compact, viscous, etc.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TESTMAT_FORM>

<i5:set>

<i5:PHRASEOTHER_TESTMAT_FORM>

<i5:TESTMAT_FORM>

SE05.02.03.0436

Test material form

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TESTMAT_FORM>

<i5:set>

<i5:PHRASEOTHER_TESTMAT_FORM>

<i5:TESTMAT_FORM_TXT>

SE05.02.03.0440

Radiolabelling

[Radiolabelling]

  1. LIST-CLOSED
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. F14

Picklist Values:

no || yes || no data

Indicate if labelled or non-labelled test material was used. Details on labelled material to be described in field 'Details on test material'.

Indication whether labelled or non-labelled test material was used.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:RADIO_LABEL>

<i5:set>

<i5:LIST_BELOW_SEL>

<i5:LIST_BELOW_SEL>

SE05.02.03.0450

Details on test material

[Details on test material]

  1. TEXT-TEMPL
  2. STRING/32768
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

Freetext Templates:

- Name of test material (as cited in study report):

- Molecular formula (if other than submission substance):

- Molecular weight (if other than submission substance):

- Smiles notation (if other than submission substance):

- InChl (if other than submission substance):

- Structural formula attached as image file (if other than submission substance): see Fig.

- Substance type:

- Physical state:

- Analytical purity:

- Impurities (identity and concentrations):

- Composition of test material, percentage of components:

- Isomers composition:

- Purity test date:

- Lot/batch No.:

- Expiration date of the lot/batch:

- Radiochemical purity (if radiolabelling):

- Specific activity (if radiolabelling):

- Locations of the label (if radiolabelling):

- Expiration date of radiochemical substance (if radiolabelling):

- Stability under test conditions:

- Storage condition of test material:

- Other:

Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

Note that any information that can be claimed confidential should be included in the subsequent field 'Confidential details on test material'.

Explanations:

- Name of test material (as cited in study report): only if different from any other identifiers provided in the preceding fields.

- Molecular formula (if other than submission substance): specify

- Molecular weight (if other than submission substance): specify

- Smiles notation (if other than submission substance): provide if available

- InChl (if other than submission substance): provide if available

- Structural formula attached as image file (if other than submission substance): see Fig.: only if different from submission substance. Indicate Fig. no. if a file is attached in field 'Attached document', e.g. state 'see Fig. 1'.

- Substance type: indicate whether pure active substance, technical product, formulation or other.

- Physical state: indicate 'gas', 'solid' or 'liquid' only if different from submission substance or if substance can occur in different physical states.

- Analytical purity: specify in %

- Impurities (identity and concentrations): specify

- Composition of the test material, percentage of components: specify if applicable

- Isomers composition: specify if applicable

- Purity test date: provide if available

- Lot/batch No.: provide if available

- Expiration date of the lot/batch: provide if available

- Radiochemical purity (if radiolabelling): specify if applicable

- Specific activity (if radiolabelling): specify if applicable

- Locations of the label (if radiolabelling): specify if applicable

- Expiration date of radiochemical substance (if radiolabelling): specify if applicable

- Storage condition of test substance: specify if applicable

- Stability under test conditions: indicate if available

Details on description and specification of the actual test material.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TESTMAT_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.02.03.0460

Confidential details on test material

[Confidential details on test material]

  1. TEXT-TEMPL
  2. STRING/32768
  3. [N/A]
  4. 1
  5. 3
  6. [N/A]

Freetext Templates:

- Analytical purity:

- Impurities (identity and concentrations):

- Composition of test material, percentage of components:

- Purity test date:

- Lot/batch No.:

- Expiration date of the lot/batch:

- Isomers composition:

- Other:

Enter any confidential information on the test material in this separate field. Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

Explanations:

- Analytical purity: specify in %

- Impurities (identity and concentrations): specify

- Composition of the test material, percentage of components: specify if applicable

- Purity test date: provide if available

- Lot/batch No.: : provide if available

- Expiration date of the lot/batch: : provide if available

- Isomers composition: specify if applicable

Confidential details on the actual test material.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:TESTMAT_CONFIDENTIAL_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.02.03.0470

Details on properties of test surrogate or analogue material

[Details on properties of test surrogate or analogue material]

  1. TEXT-TEMPL
  2. STRING/32768
  3. [N/A]
  4. 1
  5. 2
  6. [N/A]

Freetext Templates:

PHYSICO-CHEMICAL PROPERTIES

- Vapour pressure:

- Henry's law constant (for volatie substances):

- Water solubility (under test conditions):

- Solubility in organic solvents:

- log Pow:

- pKa:

- Base or acid catalysis of test material:

- log Koc:

- UV absorption:

- Stability of test material at room temperature:

- pH dependence on stability:

OTHER PROPERTIES (if relevant for this endpoint)

- Other:

ONLY if another substance, i.e. analogue or surrogate (e.g. degradation/transformation product) was used as test material, enter any relevant details on the properties of this substance that may possibly affect the test performance, particularly physico-chemical properties.

Use freetext template and delete/add elements as appropriate.

Note that the physico-chemical properties of the substance for which the submission is made should be recorded in the corresponding templates and therefore need not be repeated here. Nevertheless, the possible influence of any physico-chemical properties should be indicated / discussed in appropriate fields, particularly in fields 'Details on study design' and 'Test performance'. This holds also true if any property of the substance is different in the test medium as compared to the data recorded in the section on physico-chemical properties, e.g. lower water solubility.

Details on properties of test material, particuarly physico-chemical properties. Relevant if an analogue or surrogate was used.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROPERTIES_TESTMAT_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.02.03.0475

Study design

[Study design]

  1. HEAD-2
  2. Heading level 2
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

Subheading of section 'Study design'

 

SE05.02.03.0480

Oxygen conditions

[Oxygen conditions]

  1. LIST-OPEN-SUP
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. F25

Picklist Values:

aerobic/anaerobic || anaerobic || aerobic || other: || no data

Indicate whether test was performed under aerobic or anaerobic conditions. Include any explanations in the supplementary remarks field as appropriate.

Indication whether test was performed under aerobic or anaerobic conditions.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:OXYGEN_CONDITIONS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX>

SE05.02.03.0481

Oxygen conditions

[no label]

  1. SUP-TEXT
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:OXYGEN_CONDITIONS>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX_TXT>

SE05.02.03.0490

Soil classification system

[Soil classification]

  1. LIST-OPEN
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. F16

Picklist Values:

Canadian System of Soil Classification || DIN 19863 (Deutsche Industrie-Norm) || NF X31-107 (Norme francaise) || USDA (US Department of Agriculture) || WRB (World Reference Base for Soil Resources) || other: || no data

Select as cited in the study report. If not available from picklist, select 'other:' and specify.

Indication of soil classification system the classification of the texture is based on.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:SOILCLASS>

<i5:set>

<i5:PHRASEOTHER_SYSTEM>

<i5:SYSTEM>

SE05.02.03.0491

Soil classification system

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:SOILCLASS>

<i5:set>

<i5:PHRASEOTHER_SYSTEM>

<i5:SYSTEM_TXT>

SE05.02.03.0500

Year

[Year]

  1. YEAR
  2. NUMBER/4/####
  3. [N/A]
  4. 1
  5. 1
  6. [N/A]

 

Indicate year of classification system if available.

Year of above soil classification system.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:SOILCLASS>

<i5:set>

<i5:YEAR>

<i5:YEAR>

SE05.02.03.0509

Soil properties

[Soil properties]

  1. HEAD BLOCK
  2. Block label
  3. g226
  4. 10
  5. 1
  6. [N/A]

 

Repeat this block of fields for each different soil used as indicated by the Soil No. Enter soil type as cited in the study report and the respective soil properties.

Heading of field block 'Soil properties'

 

SE05.02.03.0510

Soil No.

[Soil No.]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. F108

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10

Select a consecutive soil number from drop-down list if more than one soil types were used.

Indication of a consecutive soil number 1-n used to distinguish the soil types examined.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:SOILNUMBER>

<i5:SOILNUMBER>

SE05.02.03.0520

Soil type

[Soil type]

  1. LIST-OPEN
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. F109

Picklist Values:

Alfisol || Andisol || Aridsol || Brunisol || Chernozem || Clay || Clay loam || Cryosol || Entisol || Gleysol || Histosol || Inceptisol || Loam || Loamy sand || Luvisol || Mollisol || Organic || Oxisol || Podzol || Regosol || Sand || Sandy clay loam || Sandy loam || Sany clay || Silt || Silt loam || Silty clay || Silty clay loam || Solonetzic || Spodsol || Ultisol || Vertisol || other:

Select from drop-down list.

Soil type (texture) as classified according to the classification system cited.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PHRASEOTHER_SOILTYPE>

<i5:SOILTYPE>

SE05.02.03.0521

Soil type

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PHRASEOTHER_SOILTYPE>

<i5:SOILTYPE_TXT>

SE05.02.03.0530

% clay

[Clay %]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Percentage of clay content: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CLAY_LOQUALIFIER>

<i5:CLAY_LOQUALIFIER>

SE05.02.03.0540

% clay

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Percentage of clay content: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CLAY_LOQUALIFIER>

<i5:CLAY_LOVALUE>

SE05.02.03.0550

% clay

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

Percentage of clay content: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CLAY_LOQUALIFIER>

<i5:CLAY_UPQUALIFIER>

SE05.02.03.0560

% clay

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Percentage of clay content: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CLAY_LOQUALIFIER>

<i5:CLAY_UPVALUE>

SE05.02.03.0570

% silt

[Silt %]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Percentage of silt content: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_SILT_LOQUALIFIER>

<i5:SILT_LOQUALIFIER>

SE05.02.03.0580

% silt

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Percentage of silt content: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_SILT_LOQUALIFIER>

<i5:SILT_LOVALUE>

SE05.02.03.0590

% silt

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

Percentage of silt content: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_SILT_LOQUALIFIER>

<i5:SILT_UPQUALIFIER>

SE05.02.03.0600

% silt

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Percentage of silt content: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_SILT_LOQUALIFIER>

<i5:SILT_UPVALUE>

SE05.02.03.0610

% sand

[Sand %]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Percentage of sand content: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_SAND_LOQUALIFIER>

<i5:SAND_LOQUALIFIER>

SE05.02.03.0620

% sand

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Percentage of sand content: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_SAND_LOQUALIFIER>

<i5:SAND_LOVALUE>

SE05.02.03.0630

% sand

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

Percentage of sand content: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_SAND_LOQUALIFIER>

<i5:SAND_UPQUALIFIER>

SE05.02.03.0640

% sand

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Percentage of sand content: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_SAND_LOQUALIFIER>

<i5:SAND_UPVALUE>

SE05.02.03.0650

% total organic carbon

[Org. C %]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Percentage of total organic carbon content: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CARBON_LOQUALIFIER>

<i5:CARBON_LOQUALIFIER>

SE05.02.03.0660

% total organic carbon

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Percentage of total organic carbon content: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CARBON_LOQUALIFIER>

<i5:CARBON_LOVALUE>

SE05.02.03.0670

% total organic carbon

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

Percentage of total organic carbon content: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CARBON_LOQUALIFIER>

<i5:CARBON_UPQUALIFIER>

SE05.02.03.0680

% total organic carbon

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Percentage of total organic carbon content: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CARBON_LOQUALIFIER>

<i5:CARBON_UPVALUE>

SE05.02.03.0690

pH

[pH]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

pH: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_PH_LOQUALIFIER>

<i5:PH_LOQUALIFIER>

SE05.02.03.0700

pH

[no label]

  1. NUM
  2. NUMBER/5/#0.##
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

pH: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_PH_LOQUALIFIER>

<i5:PH_LOVALUE>

SE05.02.03.0710

pH

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

pH: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_PH_LOQUALIFIER>

<i5:PH_UPQUALIFIER>

SE05.02.03.0720

pH

[no label]

  1. NUM
  2. NUMBER/5/#0.##
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

pH: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_PH_LOQUALIFIER>

<i5:PH_UPVALUE>

SE05.02.03.0730

Cation exchange capacity

[CEC]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Cation exchange capacity: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CATION_LOQUALIFIER>

<i5:CATION_LOQUALIFIER>

SE05.02.03.0740

Cation exchange capacity

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Cation exchange capacity: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CATION_LOQUALIFIER>

<i5:CATION_LOVALUE>

SE05.02.03.0750

Cation exchange capacity

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

Cation exchange capacity: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CATION_LOQUALIFIER>

<i5:CATION_UPQUALIFIER>

SE05.02.03.0760

Cation exchange capacity

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Cation exchange capacity: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CATION_LOQUALIFIER>

<i5:CATION_UPVALUE>

SE05.02.03.0770

Unit

[Soil properties]

  1. LIST-OPEN
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. F17

Picklist Values:

meq/100 g soil d.w. || other: || no data

Select from drop-down list.

Unit of cation exchange capacity.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CATION_LOQUALIFIER>

<i5:CATION_UNIT>

SE05.02.03.0771

Unit

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_CATION_LOQUALIFIER>

<i5:CATION_UNIT_TXT>

SE05.02.03.0780

Bulk density (g/cm³)

[Bulk density (g/cm³)]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Bulk density (g/cm³): Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_LOQUALIFIER>

SE05.02.03.0790

Bulk density (g/cm³)

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Bulk density (g/cm³): Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_LOVALUE>

SE05.02.03.0800

Bulk density (g/cm³)

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g226
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

Bulk density (g/cm³): Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_UPQUALIFIER>

SE05.02.03.0810

Bulk density (g/cm³)

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g226
  4. 1
  5. 1
  6. [N/A]

 

 

Bulk density (g/cm³): Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PROP>

<i5:set>

<i5:PRECISION_DENSITY_LOQUALIFIER>

<i5:DENSITY_UPVALUE>

SE05.02.03.0820

Details on soil characteristics

[Details on soil characteristics]

  1. TEXT-TEMPL
  2. STRING/32768
  3. [N/A]
  4. 1
  5. 2
  6. [N/A]

Freetext Templates:

SOIL COLLECTION AND STORAGE

- Geographic location:

- Pesticide use history at the collection site:

- Collection procedures:

- Sampling depth (cm):

- Storage conditions:

- Storage length:

- Soil preparation (e.g., 2 mm sieved; air dried etc.):

PROPERTIES OF THE SOILS (in addition to defined fields)

- Moisture at 1/3 atm (%):

- Bulk density (g/cm3):

For each soil type, specify soil collection and storage and properties of the soil as far as not indicated in the defined fields.

Use freetext template and delete/add elements as appropriate. Enter any details that could be relevant for evaluating this study summary or that are requested by the respective regulatory programme. Consult the programme-specific guidance (e.g. OECD HPVC, Pesticides NAFTA or EU REACH) thereof.

For each soil type, specify soil collection and storage and properties of the soil as far as not indicated in the defined fields.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:SOILCHARACTERISTICS_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.02.03.0829

Duration of test (contact time)

[Duration of test (contact time)]

  1. HEAD BLOCK
  2. Block label
  3. g227
  4. 10
  5. 1
  6. [N/A]

 

Specify duration of test in terms of contact time. Repeat block for each soil type. If different test runs have different durations, enter lower and upper value in respective subfields.

Heading of field block 'Duration of test (contact time)'.

 

SE05.02.03.0830

Soil No.

[Soil No.]

  1. LIST-CLOSED
  2. STRING/255
  3. g227
  4. 1
  5. 1
  6. F108

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10

Select a consecutive soil number from drop-down list if more than one soil types were used.

Indication of a consecutive soil number 1-n used to distinguish the soil types examined.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DURATION>

<i5:set>

<i5:SOILNUMBER>

<i5:SOILNUMBER>

SE05.02.03.0840

Duration

[Duration]

  1. LIST-CLOSED
  2. STRING/255
  3. g227
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Duration of test (contact time): Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DURATION>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOQUALIFIER>

SE05.02.03.0850

Duration

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g227
  4. 1
  5. 1
  6. [N/A]

 

 

Duration of test (contact time): Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DURATION>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOVALUE>

SE05.02.03.0860

Duration

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g227
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

Duration of test (contact time): Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DURATION>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPQUALIFIER>

SE05.02.03.0870

Duration

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g227
  4. 1
  5. 1
  6. [N/A]

 

 

Duration of test (contact time): Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DURATION>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPVALUE>

SE05.02.03.0880

Unit

[Duration of test (contact time)]

  1. LIST-CLOSED
  2. STRING/255
  3. g227
  4. 1
  5. 1
  6. F05

Picklist Values:

min || h || d || wk || mo || yr

Select from drop-down list.

Unit of time.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:DURATION>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UNIT>

SE05.02.03.0889

Initial test substance concentration

[Initial test substance concentration]

  1. HEAD BLOCK
  2. Block label
  3. g228
  4. 20
  5. 1
  6. [N/A]

 

Specify initial test concentration applied in the test runs for each soil type, normally based on mg/kg soil dw. If appropriate repeat block of fields and indicate concentration(s) based on g/ha or kg/ha or other (to be specified).

Heading of field block 'Initial test substance concentration'.

 

SE05.02.03.0890

Soil No.

[Soil No.]

  1. LIST-CLOSED
  2. STRING/255
  3. g228
  4. 1
  5. 1
  6. F108

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10

Select a consecutive soil number from drop-down list if more than one soil types were used.

Indication of a consecutive soil number 1-n used to distinguish the soil types examined.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:SOILNUMBER>

<i5:SOILNUMBER>

SE05.02.03.0900

Initial concentration

[Initial conc.]

  1. LIST-CLOSED
  2. STRING/255
  3. g228
  4. 1
  5. 1
  6. A02-1

Picklist Values:

> || >= || ca.

Enter a numeric value or a range of numeric values according to following conventions:

(i) In the first numeric field, enter a single value (Qualifier subfield left blank) or a value if preceded by '>', '>=' or 'ca.' (e.g. '20', 'ca. 20', '>20').

(ii) In the second numeric field, enter a single value if preceded by '<' or '<='.

(iii) Use both numeric fields and, as required, the lower and upper qualifier field to enter a range of numeric values (e.g. '2 - 8' or '>2 <8').

Initial concentration: Lower qualifier field providing a list with following operators: >, >=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOQUALIFIER>

SE05.02.03.0910

Initial concentration

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g228
  4. 1
  5. 1
  6. [N/A]

 

 

Initial concentration: Lower numeric field for entering a numeric value preceded either by no operator, '>', '>=' or 'ca.' (e.g. '20', '>20', '>=20', '20')

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:LOVALUE>

SE05.02.03.0920

Initial concentration

[no label]

  1. LIST-CLOSED
  2. STRING/255
  3. g228
  4. 1
  5. 1
  6. A02-2

Picklist Values:

< || <= || ca.

 

Initial concentration: Upper qualifier field providing a list with following operators: <, <=, and ca.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPQUALIFIER>

SE05.02.03.0930

Initial concentration

[no label]

  1. NUM
  2. NUMBER/20/########0.#########
  3. g228
  4. 1
  5. 1
  6. [N/A]

 

 

Initial concentration: Upper numeric field for entering a numeric value only if either a lower value is already entered to specify a numeric range or if the numeric value is preceded by either operator '<' or '<='.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UPVALUE>

SE05.02.03.0940

Unit

[Initial test substance concentration]

  1. LIST-OPEN
  2. STRING/255
  3. g228
  4. 1
  5. 1
  6. F13

Picklist Values:

mg/kg soil d.w. || g/kg soil d.w. || g/ha d.w. || kg/ha d.w. || ppm || other:

Select from drop-down list. Further information can be given in the supplementary remarks field.

Unit of initial test substance concentration.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UNIT>

SE05.02.03.0941

Unit

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. g228
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:PRECISION_LOQUALIFIER>

<i5:UNIT_TXT>

SE05.02.03.0950

Based on

[Based on]

  1. LIST-OPEN
  2. STRING/255
  3. g228
  4. 1
  5. 1
  6. F110

Picklist Values:

test mat. || act. ingr. || formulation || other: || no data

From drop-down list, select type of substance on which the initial concentration is based.

Indication whether concentration is based on active ingredient (a.i.), formulation or test material as indicated in the respective field(s).

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:PHRASEOTHER_BASIS>

<i5:BASIS>

SE05.02.03.0951

Based on

[no label]

  1. OTHERTEXT
  2. STRING/255
  3. g228
  4. 1
  5. 1
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:INITIALCONC>

<i5:set>

<i5:PHRASEOTHER_BASIS>

<i5:BASIS_TXT>

SE05.02.03.0959

Parameter followed for biodegradation estimation

[Parameter followed for biodegradation estimation]

  1. HEAD BLOCK
  2. Block label
  3. g229
  4. 5
  5. 2
  6. [N/A]

 

Indicate the parameter used to measure biodegradation. Copy field for more than one parameter as appropriate. In supplementary remarks field, give relevant details on the method. For radiochemical measurement or test substance analysis use freetext template in field 'Details on analytical methods'.

Parameter used to measure biodegradation and, in supplementary remarks field, relevant details on the method..

 

SE05.02.03.0960

Parameter followed for biodegradation estimation

[Parameter followed for biodegradation estimation]

  1. LIST-OPEN-SUP
  2. STRING/255
  3. g229
  4. 1
  5. 2
  6. F103

Picklist Values:

CH4 evolution || CO2 evolution || DOC removal || inorg. C analysis || O2 consumption || Radiochem. meas. || Test mat. analysis || TOC removal || other: || no data

Indicate the parameter used to measure biodegradation. Copy field for more than one parameter as appropriate. In supplementary remarks field, give relevant details on the method. For radiochemical measurement or test substance analysis use freetext template in field 'Details on analytical methods'.

Parameter used to measure biodegradation and, in supplementary remarks field, relevant details on the method..

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PARAMETER_BIODEGRADATION_MEASURE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX>

SE05.02.03.0961

Parameter followed for biodegradation estimation

[no label]

  1. SUP-TEXT
  2. STRING/255
  3. g229
  4. 1
  5. 2
  6. [N/A]

 

 

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:PARAMETER_BIODEGRADATION_MEASURE>

<i5:set>

<i5:PHRASEOTHER_LIST_POP_FIX>

<i5:LIST_POP_FIX_TXT>

SE05.02.03.0970

Details on analytical methods

[Details on analytical methods]

  1. TEXT-TEMPL
  2. STRING/32768
  3. [N/A]
  4. 1
  5. 2
  6. [N/A]

Freetext Templates:

DETAILS ON PRETREATMENT

- Digestion (acid used, method: e.g. micro-oven):

- Extraction (solvent used, method: e.g. liquid-liquid, SPE):

- Total 14C measurement:

- Clean up method: e.g. chemical used for chemistry method (Cu, Hg, ...) or phase and solvent used for SPE method:

- Derivatisation method if used:

- Concentration (method):

IDENTIFICATION AND QUANTIFICATION OF PARENT COMPOUND

- Separation method (e.g. HPLC, GC):

- Conditions (column, mobile phase, etc.):

- Detection method (e.g. ECD, UV, MS, ICP-AES, ICP-MS):

- Detection limits (LOD, LOQ) (indicate method of determination/calculation):

- Reproducibility in % (indicate method of evaluation; should be given for stated concentration levels):

- Linearity range:

- Internal or external calibration:

- Extraction recovery (indicate if results are corrected or not for recoveries):

- Method of confirmation of identity of measured compound:

IDENTIFICATION AND QUANTIFICATION OF TRANSFORMATION PRODUCTS

IDENTIFICATION AND QUANTIFICATION OF NON-EXTRACTABLE RESIDUES

If the amount of test material in the test solutions was monitored, enter any details on the analytical methods used. Use freetext template and delete/add elements as appropriate. Copy any subheading(s) under IDENTIFICATION AND QUANTIFICATION OF PARENT COMPOUND to include the respective information for transformation products and/or non-extractable residues.

Details on the analytical method used.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:ANALYT_METHOD_DETAILS>

<i5:set>

<i5:FREETEXT_BELOW>

<i5:FREETEXT_BELOW>

SE05.02.03.0979

Experimental conditions

[Experimental conditions]

  1. HEAD BLOCK
  2. Block label
  3. g230
  4. 20
  5. 1
  6. [N/A]

 

For each soil type, indicate the environmental conditions during the test if available or assumed in the model, if estimated.

Heading of field block 'Experimental conditions'.

 

SE05.02.03.0980

Soil No.

[Soil No.]

  1. LIST-CLOSED
  2. STRING/255
  3. g230
  4. 1
  5. 1
  6. F108

Picklist Values:

#1 || #2 || #3 || #4 || #5 || #6 || #7 || #8 || #9 || #10

Select a consecutive soil number from drop-down list if more than one soil types were used.

Indication of a consecutive soil number 1-n used to distinguish the soil types examined.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:EXPCOND>

<i5:set>

<i5:SOILNUMBER>

<i5:SOILNUMBER>

SE05.02.03.0990

Temperature

[Temp.]

  1. TEXT
  2. STRING/255
  3. g230
  4. 1
  5. 1
  6. [N/A]

 

Specify test temperature including mean and range values during test if available or temperature assumed in the model, if estimated. Use °C; convert other units and indicate original data in parentheses if applicable.

The temperature, preferably in °C, used in the experimental determination of the test value or assumed in the model, if estimated.

<i5:EndpointStudyRecord>

<i5:scientificPart>

<i5:EN_STABILITY_IN_SOIL>

<i5:EXPCOND>

<i5:set>

<i5:TEMP>

<i5:TEMP>

SE05.02.03.1000

Humidity

[Humidity]

  1. TEXT
  2. STRING/255
  3. g230
  4. 1
  5. 1
  6. [N/A]